S2K Commerce - Shopping Cart - B2B

Actions
Loading...

S2K Commerce - Products Dropdown - B2B

Actions
Loading...
Log In to Your Account
Log In for faster checkout
 
Forgot your password?

S2K Commerce - Order Entry

Actions
Loading...
Keyway Adjustable Billet Timing Set for Pontiac 326-454
Hi-Tech Pushrod Length Checker 9.800" to 10.800" Length
Pushrod Length Checker, Hi-Tech, Steel, Adjustment Range 9.800 in. to 10.800 in., Ball Ends, Each
Purple 10 lb Nitrous Oxide Bottle
Comp Cams 82000 NITROUS BOTTLE, WITH VALVE ZEX PURPLE
A/F P5R; 6 F x 9 B x 7 T x 7 H in
Air Filter, 5-Ply Progressive, Conical, 6.0 in. Inlet, 7.0 in. Length, 7.0 in. Top, 9.0 in. Bottom, Each
Sameday Shipping Available from Warehouse
Sameday Shipping Available from Warehouse
Sameday Shipping Available from Warehouse
Sameday Shipping Available from Warehouse
Sameday Shipping Available from Warehouse
Sameday Shipping Available from Warehouse
Sameday Shipping Available from Warehouse
Sameday Shipping Available from Warehouse
Sameday Shipping Available from Warehouse
CABLE PLATE 289-302; GOLD FINISH
212-1490Edelbrock 36014 RELAY HARNESS32 212-1490AMP POWER RELAY, 12 VOLT FOR PRO-TUNER EFI HARNESS33
(Set of 4 Springs)
Valve Cover Gasket S
Axle Hsg. Cover or D
Dodge 04.5-07 5.9L Cummins
THIS ITEM REQUIRES A CORE CHARGE, MUST CONTACT SALES DESK BEFORE ORDERING FOR ACCURATE TOTAL!
Exhaust System Kit
Flowmaster 817282 Header-back System 409S - Dual Rear Exit - American Thund 67-70 Ford Mustang, V8, Header-back, Super 44 Series Mufflers, Mandrel Bent
12 Prime R2 4-Ohm DVC Subwoofer
Car Audio Fanatics wanting big bass can rely on the Prime R2D4-12 subwoofer. This 12 subwoofer handles 250 Watt RMS and the 4-Ohm Dual Voice Coil design lets you to wire them in various configurations. 12 AWG compression terminals Anodized aluminum voice coil former Optimized for both sealed and vented enclosures Mica injected polypropylene cone Linear spider with embedded 16 AWG tinsel leads StampCast basket with integrated spider venting Integrated PVC trim ring
The Power T1650-S is a T1 component system with a separate tweeter and a true 6.5" midrange optimized for a wide variety of U.S., European, and import vehicles. Supplied with an external tweeter crossover. Injection molded carbon fiber filled polypropylene cone Linear high excursion matched motor magnetics and suspension design 1" treated fabric dome tweeter VAST vertical attach surround technique Santoprene rubber surround High temp aluminum voice coil Fatigue and tear resistant poly cotton spider FlexFit 2 mounting Stamp-cast aluminum frame Asymmetrical 18dB HP and 12dB LP external crossover network User selectable tweeter level, bi-amp, and on/off axis switching Flush and surface (angled) tweeter mounting hardware included Grilles and mounting hardware included 1 Year Standard Warranty
Fuel Acc (filters, gauges, etc)
SERVICE PARTS
Holley 508-20 GASKET, LS THROTTLE BODY 92/102MM Service Parts
Metra 95-7315 Hyundai Tucson DDIN Kit 05-09
GAUGE MOUNT, A-PILLAR W/SPKR, FULL, TRIPLE, 2 1/16", SILVERADO/SIERRA 99-07
Gauge Pod, Triple 2 1/16 in., Black, ABS Plastic, Chevy, GMC, Pickup/Duramax with Speaker, Each
07-13 GMC SIERRA CC SB 6.5 BED
ROCKER ARMOR KIT SP FIT 07-13 GMC SIERRA CC SB 6.5 BED
Product Highlights: 12" 4-ohm shallow-mount subwoofer carbon-glass fiber composite cone with butyl rubber surround cast aluminum basket push terminals handle up to 8-gauge wire power range: 50-450 watts RMS peak power: 1,500 watts frequency response: 38-200 Hz mounting depth: 3-7/16"
Power-Plus Series Throttle Body
05-12 DODGE/JEEP/CHRYSLER HEMI 5.7/6.1L POWER PLUS 90MM THROTTLE BODY
36" Muffler Delete Pipe, AL Universal Dodge Replaces all 36" overall length
MBRP MDA36 36" Muffler Delete Pipe, AL 36" Muffler Delete Pipe, AL Universal Dodge Replaces all 36" overall length
FUEL PRESSURE GAUGE ADAPTER
Enhancement Products
Enhancement Products
MSD Ignition Controller with coil drivers for Ford 4.6L/5.4L
New technology to go old school! When you retro-fit a Ford 4.6L or 5.4L (SOHC/DOHC) with a carbureted intake manifold, you'll need this new Controller to handle the ignition chores. The Controller plugs into the coil packs and sensors of the engine for a direct installation. From a PC, using our Pro-Data+ software, you can program a custom timing curve, a step retard, two step rev limiter and even a vacuum advance. A great system for street rods and retro muscle cars.
QUICK RELEASE PIN
QUICK RELEASE PIN
STANDARD FOGGER NOZZLE
NOS 13700 Nozzles STANDARD FOGGER NOZZLE
LO SHOCK ABSORBER
STREET PERFORMANCE
60-72 CHEVROLET C-10 PICKUP 3" OR 4" REAR DROP
60-72 Chevrolet C-10 Pickup 3" or 4" Rear Drop
Ignition Coil, Flame-Thrower II, Canister, Round, Epoxy Filled, Black, 45,000 V, Each
For use on camshafts, lifters, pushrods, piston skirts, main and rod bearings, and bolt threads, excellent rust and corrosion inhibitor, allows for long-term storage Prepares potential wear surface and prevents metal contact before adequate lubrication can be supplied Unlike other assembly lubes, Red Line's will not plug filters after initial engine start-up Provides 3x greater film strength than conventional black Molybdenum Disulfide greases Excellent rust and corrosion inhibitor, allows for long-term storage For use on camshafts, lifters, pushrods, piston skirts, main and rod bearings, and bolt threads Do not use on exhaust bolts or other high temperature bolts which require an anti-seize Recommended and used by top camshaft and drivetrain manufacturers
2007-2016 ESCALADE / EXT / ESV/AVALANCHE/TAHOE/SUB/YUKON/XL SST LIFT KIT 2W
These ReadyLift SST lift kits are the perfect solution if you want to add a little lift. They are the first-ever mild lift kits that allow you to use larger wheel and tire combinations, while keeping that smooth OEM ride and drivability. ReadyLift's "Smart Suspension Technology" is used to make these kits very user-friendly to install and they require no cutting.
-08 (1/2") NPT female pipe coupler - blue
-08 (1/2") NPT Female Pipe Coupler - Blue
-16 (1") NPT female pipe coupler - black
-04 (1/4") NPT male to -02 (1/8") NPT female reducer - blue
-04 (1/4") NPT Male To -02 (1/8") NPT Female Reducer - Blue
-03 two piece AN/JIC flare cap nut - blue
-03 Two Piece AN/JIC Flare Cap Nut - Blue
-07 plated hose finisher - chrome
-07 Plated Hose Finisher - Chrome
FUEL FILTER, PROFILTER, EFI, 6" LONG, -10 IN/OUT, 10 MICRON PAPER ELEMENT,
Precision Machined; Ensures Precise Thread Engagement; Lightweight Aluminum; Designed To Match Up With All Russell Hose Ends; 37 Deg. Sealing Angle; Positive Seal At Maximum Operating Pressures Russell's wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common components. To compliment the looks of the hose installation, three finishes are available - ultra-bright Endura, traditional blue anodized or our new black anodized fittings.
Adapter #6 Flare X 1/4in NPT
Precision Machined; Ensures Precise Thread Engagement; Lightweight Aluminum; Designed To Match Up With All Russell Hose Ends; 37 Deg. Sealing Angle; Positive Seal At Maximum Operating Pressures Russell's wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common components. To compliment the looks of the hose installation, three finishes are available - ultra-bright Endura, traditional blue anodized or our new black anodized fittings.
Adapter #6 Flare X 3/8in NPT
Precision Machined; Ensures Precise Thread Engagement; Lightweight Aluminum; Designed To Match Up With All Russell Hose Ends; 37 Deg. Sealing Angle; Positive Seal At Maximum Operating Pressures Russell's wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common components. To compliment the looks of the hose installation, three finishes are available - ultra-bright Endura, traditional blue anodized or our new black anodized fittings.
Adapter Fitting Flare to Pipe Straight
Precision Machined; Ensures Precise Thread Engagement; Lightweight Aluminum; Designed To Match Up With All Russell Hose Ends; 37 Deg. Sealing Angle; Positive Seal At Maximum Operating Pressures Russell's wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common components. To compliment the looks of the hose installation, three finishes are available - ultra-bright Endura, traditional blue anodized or our new black anodized fittings.
Adapter -6 Fuel Pressure Take Off
Precision Machined; Ensures Precise Thread Engagement; Lightweight Aluminum; Designed To Match Up With All Russell Hose Ends; 37 Deg. Sealing Angle; Positive Seal At Maximum Operating Pressures Russell's wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common components. To compliment the looks of the hose installation, three finishes are available - ultra-bright Endura, traditional blue anodized or our new black anodized fittings.
Fuel Pressure Take Off Fitting
Precision Machined; Ensures Precise Thread Engagement; Lightweight Aluminum; Designed To Match Up With All Russell Hose Ends; 37 Deg. Sealing Angle; Positive Seal At Maximum Operating Pressures Russell's wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common components. To compliment the looks of the hose installation, three finishes are available - ultra-bright Endura, traditional blue anodized or our new black anodized fittings.
Adapter -6AN Male To M10 X 1.0 Metric Steel W/ Crush Washer
Precision Machined; Ensures Precise Thread Engagement; Lightweight Aluminum; Designed To Match Up With All Russell Hose Ends; 37 Deg. Sealing Angle; Positive Seal At Maximum Operating Pressures Russell's wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common components. To compliment the looks of the hose installation, three finishes are available - ultra-bright Endura, traditional blue anodized or our new black anodized fittings.
Scosche CAD Cyanoacrylate Debonder 1oz
Scosche CAG2 Cyanoacrylate Glue Medium 2oz
2007-2013 GMC SIERRA 1500 69.3IN;FLEETSIDE BLACK RUFF RIDERZ - 4PC
2007-2013 GMC SIERRA 1500 69.3IN;FLEETSIDE BLACK RUFF RIDERZ - 4PC
The Vision X 6 rectangular P-DY2M1F features a deutsch splitter, offers a easy way to create multiple deutsch plugs. The P-DY2M1F comes with a standard warranty, each weighs .3 pound.
2006-2009 DODGE RAM 2500 BUGFLECTOR II
2009-2014 FORD F-150 AEROSKIN ACRYLIC HOODPROTECTOR
2009-2014 FORD F-150 AEROSKIN ACRYLIC HOODPROTECTOR
2013-2016 CHEVROLET TRAVERSE AEROSKIN ACRYLIC HOODPROTECTOR
2013-2016 CHEVROLET TRAVERSE AEROSKIN ACRYLIC HOODPROTECTOR
2010-2016 DODGE RAM 2500 CHROME HOOD SHIELD
2010-2016 DODGE RAM 2500 CHROME HOOD SHIELD
2015-2017 FORD F-150 VENTVISOR 4PC
2015-2017 FORD F-150 VENTVISOR 4PC
PERF2X LED LIGHT BAR BLK HP LED LIGHT BAR LOW PROFILE D
Street/Strip Pump was engineered for 200-750 HP carbureted engines making this a perfect choice for a daily driver, street rod or demanding ET-bracket race car.
Valve Cover, Elite II, Chrysler, 383-440 Big Block V8, Polished
10"
Dual 10" Downfire
PRO15 Full Face Helmet Snell SA-2015 Rated; Gloss Steel X-Large
RaceQuip 273666 PRO15 Full Face Helmets PRO15 Full Face Helmet Snell SA-2015 Rated; Gloss Steel X-Large
RaceQuip 253112 OF15 Open Face Helmets OF15 Open Face Helmet Snell SA-2015 Rated; Gloss White Small
HDX Drop Nerf Step Bars
Sameday Shipping Available from Warehouse
Sameday Shipping Available from Warehouse
2016 CHEVROLET COLORADO/CANYON (EXT/CREW CAB SHORT BED) 0"-3" F/ 4" R W/ ST
2016 Chevrolet Colorado/Canyon (Ext/Crew Cab Short Bed) 0"-3" F/ 4" R W/ St
68-72 GM "A" Body SB Incl Fron
Ride Tech 11245010 StreetGrip Suspension System 68-72 GM "A" Body SB Incl Fron
FM4Q 3W OSRAM W/MOUNTING HARDWARE AND PIGTAIL CONNECTORS (SET OF 2)
HDX Drop Nerf Step Bars
HDX Drop Nerf Step Bars
Wires Univ 8MM 8cyl Ceramic
Silver Ceramic
JBA Headers 6962SJS Long Tube Headers
D-SERIES PRO SPOT FM /2
(FOR 4105V)
Viper 7146V 7146V 4-BTN ASK REMOTE (FOR 4105V)
11-16 Ford F250/350/450 6.7L
Crimp Tool & Connector Kit
Universal, black ceramic 45
17-18 NISSAN PATHFINDER
 

BAKFlip MX4, features heavy-duty aluminum matte finish panels that offer superior UV and scratch resistance, and an enhanced premium density foam core. The MX4 is the upgrade to the G2 aluminum series, equipped with upgraded latch housing components, and an all-new integrated tailgate seal that allows the tailgate to close with the cover up or down.

Designed to perform in the most extreme conditions. The MX4's resilient infrastructure is designed for everyday use, with upgraded components that provide enhanced resistance to the elements without compromising its sleek, low-profile look and feel. The MX4's solid and robust design is flush mount and backed by an extended 3-year warranty.

  • Matte Finish Aluminum Panels
  • Weight rated up to 400 Lbs.
  • Premium Density Foam Core
  • Premium UV Resistant

NOTE: Some 8' applications may not allow for 3rd brake light visibility due to the height of cab and light location.

1500 Crew Cab 2019 (Excl. 2019 Ram 1500 Classic)
2019 GMC SIERRA 1500
SILV/SIERRA 1500 14-16 5.3L V8 AT/MT 2/4WD 4DR EC STD B (78.7IN.); CC SB (6
F-150 15-16 2.7L/3.5L V6/5.0L V8 AT 2+4WD 2+4DR EC STDB (78.8in.) CC SB (67
SILV/SIERRA 1500 14-16 5.3L V8 AT/MT 2/4WD 4DR EC STD B (78.7IN.); CC SB (6
PRO-XS;3in.;2-1/2in.;19in.x9-1/2in.x4in. OVAL CEN/DUAL W/O NOTCH
PRO-XS;2-1/2in.;2-1/2in.;14in.x9-1/2in.x4in. OVAL OFF/OFF W/O NOTCH
PRO-XS;3in.;3in.;14in.x9-1/2in.x4in. OVAL OFF/OFF W/O NOTCH
PRO-XS;2-1/4in.;2-1/4in.;14in.x9-1/2in.x4in.; OVAL CEN/OFF W/O NOTCH
PRO-XS;3in.;3in.;14in.x9-1/2in.x4in. OVAL CEN/OFF W/O NOTCH
Auto Fuel Tank Repair Kit
Metal Prep - Quart
w/ 4x 40909 Kits
1998.5-2004.5 2500/3500
2008-2010 F250/350
2011-2014 2500/3500
2001-2010 2500/3500
2015-2016 2500/3500
2011-2014 2500/3500
BLACK/GRAY ONE SIZE FITS ALL
 The new Series 2A has new features never seen before in the Head and Neck Restraint market.  These new Patent Pending Features include:

Advanced Axis Adjustment allows you to adjust shoulder width, arm angle and arm width. Fits different body shapes and sizes and adjusts to different race seats. 

  • Super Lightweight at approximately 900 grams.
  • Extremely Comfortable feels like you have nothing on.
  • Dual Compound Frame Specialized Fiberglass Reinforced Nylon is used for the shoulder frame offering leading structural characteristics. Arms made with a Modified Alloy material give the device a dampening characteristic in a crash.  The two materials work together offering excellent performance.
  • Stainless Steel Hardware screws and binary post built with high quality and strength to provide long lasting strength.
  • Kevlar Webbing Single Point Tether connects helmet to restraint and offers good side to side motion during use.
  • 02 Spring Clip Quick Connect makes it even easier to disconnect the device from the helmet.
  • Belt Channel with Wings accepts 2” or 3” belts.
  • Replaceable Padding is easy to clean and/or replace for continued comfort.
  • Helmet Hardware needed is included to connect to helmet.
  • SFI 38.1 Certified
BLACK/GRAY ONE SIZE FITS ALL
 The new Series 6A has new features never seen before in the Head and Neck Restraint market.  These new Patent Pending

Features include:

  • HIGH- Back provides more natural pull angle and easier side to side movement
  • Advanced Axis Adjustment allows you to adjust shoulder width, arm angle and arm width. Fits different body shapes and sizes through adjustments and works for different race seat configurations
  • Super Lightweight at approximately 925 grams
  • Extremely Comfortable feels like you have nothing on
  • 02 Spring Clip Quick Connect makes it even easier to connect or disconnect the device from the helmet
  • Dual Compound Frame Specialized Fiberglass Reinforced Nylon is used for the shoulder frame offering leading structural characteristics. Arms made with a Modified Alloy material give the device a dampening characteristic in a crash.  The two materials work together offering excellent performance
  • Stainless Steel Hardware screws and binary post built with high quality and strength to provide long lasting strength
  • Kevlar Webbing Tether connects helmet to restraint and offers good side to side motion during use
  • Belt Channel with Wings accepts 2” or 3” belts
  • Replaceable Padding is easy to clean and/or replace for continued comfort
  • Helmet Hardware needed is included to connect to one helmet.
  • SFI 38.1 Certified

Rebates & Specials

Click here for more deals!