Home  > Maradyne(x)
View:
Champion Series Universal Fan (7", 130w, Puller Only)
7 in., low profile, puller S blade fan with 130 watt motor. Lowest profile high performance reversibles on the market Sealed motor tested in accordance with DIN EN 60529, dust and water resistant to IP68 Quiet, S-blade design  works as a puller or pusher fan (ships as a puller) All glass-filled nylon construction includes (4) 90° mounting feet and nylon tie kit Includes locking mating pigtail connector and rubber spacers for proper spacing off of heat exchanger Optional bracket (sold separately) SPECIFICATIONS M073K MOTOR 130w CURRENT DRAW 6.5 CFM @ 0 in. STATIC 375 DEPTH 2.48 in.
Item#:
369-M073K
Manufacturer Item:
M073K
Manufacturer:
Maradyne
You must be logged in to order this item. Log in here
Champion Series Universal Fan (8", 130w, Reversible)
8 in., low profile, reversible S blade fan with 130 watt motor. Lowest profile high performance reversibles on the market Sealed motor tested in accordance with DIN EN 60529, dust and water resistant to IP68 Quiet, reversible S-blade design  works as a puller or pusher fan (ships as a puller) All glass-filled nylon construction includes (4) 90° mounting feet and nylon tie kit Includes locking mating pigtail connector and rubber spacers for proper spacing off of heat exchanger Optional bracket (sold separately) SPECIFICATIONS M083K MOTOR 130w CURRENT DRAW 8.1 CFM @ 0 in. STATIC 540 DEPTH 2.48 in.
Item#:
369-M083K
Manufacturer Item:
M083K
Manufacturer:
Maradyne
You must be logged in to order this item. Log in here
Nylon Pull Through Tie Kit: tie straps, square spacers, locks, round spacer
Included with all Champion and Challenger Series fans (not recommended on fans larger than 12 in.). Kit includes: (4) Tie Straps (4) Square Spacers (4) Plastic Locks (4) Round Spacers
Item#:
369-M0912T
Manufacturer Item:
M0912T
Manufacturer:
Maradyne
You must be logged in to order this item. Log in here
Condenser Relay Fan Harness
Operates electric fan when compressor clutch is engaged. Kit includes: Heavy gauge wire harness Harness relay Weatherproof fuse Electrical connectors
Item#:
369-MFA101
Manufacturer Item:
MFA101
Manufacturer:
Maradyne
You must be logged in to order this item. Log in here
Relay Fan Harness with 185 Temp Sensor
Operates an electric radiator fan according to engine water temperature. Kit includes: Heavy gauge wire harness Harness relay Weatherproof fuse Electrical connectors MFA108  185° (on at 185°  off at 170°) temperature switch (for carbureted engines) Can be converted to a 6V operation for Pacesetter 6V Series
Item#:
369-MFA102
Manufacturer Item:
MFA102
Manufacturer:
Maradyne
You must be logged in to order this item. Log in here
15" Texas Twister Engine Driven Fan, clockwise, 8000 rpm max
14 in.  18 in. Nylon Blades Constructed of a heavy duty flexible blend of glass-filled nylon and thermoplastic elastomer Maximum 8,000 RPM Economical cooling for any car with 4 bolt water pump pulley Lightweight, for weight conscious racers Lowest cost cooling solution in the market Includes mounting washers
Item#:
369-MFA115
Manufacturer Item:
MFA115
Manufacturer:
Maradyne
You must be logged in to order this item. Log in here
Jetstreme II Shroud Fan - Dual 12" 160w Fans - No Controls
Dual 12 in., shrouded low profile, puller S blade fan with (2) 130 watt motor. Low profile allow for turbo (2) Sealed motor tested in accordance with DIN EN 60529, dust and water resistant to IP68 Quiet, puller S-blade design All glass-filled nylon construction includes MFA107 (bracket to fit Jetstreme Fans) Includes locking mating pigtail connector and rubber spacers for proper spacing off of heat exchanger MFA100 (adjustable thermostat) MFA111 (dual fan adapter) Recommended wire harnesses (sold separately) SPECIFICATIONS MJS23KC MOTOR (2) 130w CURRENT DRAW 14.4 CFM @ 0 in. STATIC 2,310 WIDTH 26 in. HEIGHT 15 in. DEPTH 3.23 in.
Item#:
369-MJS23KC
Manufacturer Item:
MJS23KC
Manufacturer:
Maradyne
You must be logged in to order this item. Log in here
Jetstreme II Shroud Fan - Dual 12" 160w with MFA100 & MFA111 Harnesses
Dual 12 in., shrouded low profile, puller S blade fan with (2) 160 watt motor. Low profile allow for turbo (2) Sealed motor tested in accordance with DIN EN 60529, dust and water resistant to IP68 Quiet, puller S-blade design All glass-filled nylon construction includes MFA107 (bracket to fit Jetstreme Fans) Includes locking mating pigtail connector and rubber spacers for proper spacing off of heat exchanger Recommended wire harnesses (sold separately) SPECIFICATIONS MJS26K MOTOR (2) 160w CURRENT DRAW 24.8 CFM @ 0 in. STATIC 2,600 WIDTH 26 in. HEIGHT 15 in. DEPTH 3.62 in.
Item#:
369-MJS26K
Manufacturer Item:
MJS26K
Manufacturer:
Maradyne
You must be logged in to order this item. Log in here
Pacesetter Series Universal Fan 8" 90w Reversible
Dual 11 in., shrouded high profile, puller straight blade fan with (2) 225 watt motors and top & bottom mounting flanges. (2) 225 watt heavy duty motors Powerful, wide straight blade (puller only) All glass-filled nylon construction Includes locking mating pigtail connector and rubber spacers for proper spacing off of heat exchanger Recommended wire harnesses (sold separately) SPECIFICATIONS MM22KTS MOTOR (2) 225w CURRENT DRAW 22.0 CFM @ 0 in. STATIC 2,760 WIDTH 23.5 in. HEIGHT 18.25 in. DEPTH 3.80 in.
Item#:
369-MM22KT
Manufacturer Item:
MM22KT
Manufacturer:
Maradyne
You must be logged in to order this item. Log in here
View: