Home  > Rugged Ridge(x)
View:
X-Clamp; Black; 2.25-3 Inches
Looking to add some versatility to your ride? The patent pending Rugged Ridge X-Clamp Mounting System features three stunning finishes of black, textured black and sleek silver and offers unparalleled mounting versatility for your convenience. Designed to be extremely adaptable, the new X-Clamp system is an innovative way to mount lights, cameras, antennas and more on any 2.25-3 inch diameter tubing, regardless of the vehicle they are being mounted to. Simple to install regardless of the application, each clamp uses state-of-the-art Pivotal Fit Technology and can be installed by rotating it to fit the tube diameter, pivoting the mounting bracket to the desired position, and adding the preferred accessory. No other clamp on the market will give you a perfect fit on such a range of tube sizes! Patent Nos. 9,610,888; 9,145,084; D773,110
Item#:
481-11030.01
Manufacturer Item:
11030.01
Manufacturer:
Rugged Ridge
You must be logged in to order this item. Log in here
Hood Catches, Silver
This replacement fully adjustable silver hood catch from Rugged Ridge was built as a strong direct replacement for the OE catches that degrade and fail after years of use. Installation is a breeze for any do-it-yourselfer with basic hand tools; the catches were designed to be a bolt-on solution using the same mounting points as the factory hardware. Does not include the hood bracket.
Item#:
481-11116.07
Manufacturer Item:
11116.07
Manufacturer:
Rugged Ridge
You must be logged in to order this item. Log in here
Door Entry Guard Kit, 4 piece
Rugged Ridge created these All Terrain Door Entry Guards to prevent the unsightly scuffs and scratches that happen just by climbing in and out of your Jeep. Defending those unprotected door sills couldn?t be any easier. When you install these Door Entry Guards, you?ll be preserving your precious paint and adding a cool accent at the same time. Constructed of a super-tough thermoplastic, each guard features an inlaid all-terrain tread pattern so they look just as great as they work- whether the doors are on or off. And installation is a breeze with the provided automotive-grade adhesive foam tape. Kit includes pieces for both 2- and 4-Door Wrangler JL and Gladiator JT models. Patent No. D627,285
Item#:
481-11216.32
Manufacturer Item:
11216.32
Manufacturer:
Rugged Ridge
You must be logged in to order this item. Log in here
Window Visors, Matte Black
Rugged Ridge Window Visors are designed to vent your Wrangler JL or Gladiator JT interior with a fresh flow of air, reducing stale air and window fogging while improving overall cabin comfort. Wind noise is greatly reduced too as the visor keeps the rain outside as a crisp circulation of fresh air comes in. Rugged Ridge Visors are molded from a durable 2mm thick matte finished acrylic that is scratch-resistant and installs in minutes with the included double-sided automotive grade adhesive. Set does both front and rear doors.
Item#:
481-11349.17
Manufacturer Item:
11349.17
Manufacturer:
Rugged Ridge
You must be logged in to order this item. Log in here
Wraparound Bug Deflector; Smoke; 07-17 Jeep Wrangler JK
Protect your windshield and hood from flying debris and bugs with this durable bug deflector from Rugged Ridge. Constructed of durable shatter resistant smoked acrylic, this bug shield is designed to last the test of time. Installation is easy using double-sided tape and under hood screws. Minor drilling required.
Item#:
481-11350.02
Manufacturer Item:
11350.02
Manufacturer:
Rugged Ridge
You must be logged in to order this item. Log in here
XHD Rock Sliders, Steel
Preserve your pristine rocker panels and defend them from the harshest off-road assaults. Rugged Ridge XHD Rock Sliders protect the vulnerable rocker panel and lower body pinch seam with an innovative one-piece design that?s as tough as they come. Thick 3mm steel plate is CNC cut and precision-welded to give XHD Rock Sliders a sturdy boxed rail section that serves as a convenient step, while it contends with boulders, bumps and blows. A tough satin black powder coat finish gives these Rock Sliders superior rust/corrosion resistance and they?ll work with all stock and most aftermarket fender flares. Features a soft foam backing to help protect the vehicles paint and install easily with no drilling required.
Item#:
481-11504.32
Manufacturer Item:
11504.32
Manufacturer:
Rugged Ridge
You must be logged in to order this item. Log in here
Third Brake Light Extension Kit
If you are going to larger tires and still want to use your stock spare tire carrier, you will find that your third brake light no longer fits. The Rugged Ridge third brake light extension kit solves this problem. By adding two inches, you elevate the third brake light easily over a 33-34 inch tire. Made from black powder coated steel, your light can be seen again with this easy to install spacer.
Item#:
481-11546.23
Manufacturer Item:
11546.23
Manufacturer:
Rugged Ridge
You must be logged in to order this item. Log in here
Spartacus HD Tire Carrier, Kit, 18-19 Jeep Wrangler JL
The Spartacus HD Tire Carrier Kit for Wrangler JL is the ideal solution for mounting your oversized spare wheel and tire combo. Functionally designed to manage the amplified force and vibrations produced during extreme off-road conditions, delivering impressive strength/stability with a factory-quality appearance. The precision die-cast aluminum Hinge Casting provides maximum strength without the excessive weight of traditional steel carriers. This one-piece design maintains easy, one-handed access to the rear cargo area, rigidly linking the tail gate to the reinforced section of the rear quarter panel. This, in combination with forged steel hinge brackets and hardened steel pins, results in far superior load-bearing capacity than the factory tailgate hinges, effectively reducing wear and greatly increasing longevity. All finished in a tough satin black powder coat finish that defies the elements. When paired with our Spartacus HD Wheel Mount, the result is a tailgate tire carrier mount so capable, you can haul spare combos up to 40-inches in diameter. Compatible with OE and most aftermarket rear bumpers and installs easily with no drilling required. US Patent No. D758,829
Item#:
481-11546.55
Manufacturer Item:
11546.55
Manufacturer:
Rugged Ridge
You must be logged in to order this item. Log in here
Spartan Nerf Bars
Let?s face it...running boards might be alright for Grandpa?s classic truck or maybe an occasional parade float. But if you need a little help climbing into your Gladiator JT, go with a side step that is actually designed to enhance your truck?s stance. Rugged Ridge Spartan Nerf Bars feature a 3-inch OD primary tube that mount in a higher position than conventional tube steps for a cleaner look, while patented drop-down hoops at each door lend a firm step to help ease entry/exit. Constructed from tough .084 wall steel tubing and finished with a durable 3-stage textured powder coat, Spartan Nerf Bars are designed with the strength and enduring good looks that your Jeep JT demands. Includes all necessary installation hardware and installation instructions.
Item#:
481-11596.12
Manufacturer Item:
11596.12
Manufacturer:
Rugged Ridge
You must be logged in to order this item. Log in here
Hurricane Flat Fender Flare Kit
Jeep enthusiasts can now get an aggressive off-road look for their Jeep with Rugged Ridge's newly designed Hurricane Flat Fender Flares. Drawing inspiration from the company's own historical Jeep collection, each new Hurricane Flat Fender Flare incorporates a unique double bolt pocket that combines the popular modern pocket style with the traditional flat fender design first found on the 1941 Willys MA. Engineered for both form and function, the fender flare's unique shape is built to complement the Wrangler's body, resting high on the vehicle and providing extra clearance for oversized wheels and tires while on trails while protecting the vehicle's paint from flying rocks, mud and any other elements found outdoors. Each flare is constructed from durable black TPE plastic that can be left unfinished or painted to match the factory paint. Included with each purchase are two sets of durable corrosion resistant fasteners, one stainless steel and one black so owners can personalize the final look to their tastes. Patent No. D712,324
Item#:
481-11640.10
Manufacturer Item:
11640.10
Manufacturer:
Rugged Ridge
You must be logged in to order this item. Log in here
Front Fender Chop Brackets
Modifying JL flares for off-road is easy and the look is nothing short of heroic with the Rugged Ridge Fender Chop Bracket Kit. By removing the bulky factory fender light assembly, you?ll have greater clearance for oversized tires with nothing to get between you and that next obstacle. Sturdy steel chop brackets install easily and lend support for the front of the factory fender flare, adding a fearless, aggressive new look. And since Jeeps don?t live solely off-road, we?ve built-in bullet-style side marker and turn signal lights to ensure safe on-road operation too. Brackets come in pairs, for both Rubicon and Sahara models, and feature a matte black powder coat finish that blends seamlessly with the factory flare finish. All installation hardware and instructions are included for a hassle-free install in record time.
Item#:
481-11640.92
Manufacturer Item:
11640.92
Manufacturer:
Rugged Ridge
You must be logged in to order this item. Log in here
Door Handle Recess Guards; 07-17 Jeep Wrangler JKU
Give your Jeep a great new custom look in just a few minutes! Made from ABS plastic, these exterior trim pieces are designed to resist flaking and oxidation. Easy no drill installation! They install in seconds using pre-applied double-sided tape. Buy the Recess Guard and door handle kits for the ultimate look!
Item#:
481-11651.26
Manufacturer Item:
11651.26
Manufacturer:
Rugged Ridge
You must be logged in to order this item. Log in here
View: