Home  > Competition Engineering(x)
View:
SHOCK REAR DRAG RACE
These Competition Engineering adjustable drag shocks offer a 3-way valving system to dial-in the extension/compression ratio needed for any track condition. The front shocks have three adjustable ratios of 90/10, 80/20, and 60/40. The ratios for the rear shocks are 70/30, 60/40, and 50/50. These numbers represent the percentage of force required to extend (first number) and compress (second number) the shock. By changing the settings on the front and rear shocks, you can dial-in the car to raise the front on initial launch for weight transfer, and then settle smoothly for a final charge to the finish line. Ride Height:Stock Extended Length (in):23.620 in. Collapsed Length (in):14.150 in. Internal Design:Monotube Adjustable Valving:Yes Gas Charged:No Upper Mount:Eyelet Lower Mount:Eyelet Bushing Material:Rubber Bushing Color:Black Boot Included:No Body Diameter (in):1.630 in. Quantity:Sold individually.
Item#:
117-C2730
Manufacturer Item:
C2730
Manufacturer:
Competition Engineering
You must be logged in to order this item. Log in here
Item#:
117-C3109
Manufacturer Item:
C3109
Manufacturer:
Competition Engineering
You must be logged in to order this item. Log in here
8PT HOOP USE W/C3000
Building your protective race bubble begins with one of these Competition Engineering 8-point roll bar main hoops. Made from your choice of chromoly or mild steel, these strong one-piece hoops mount easily with minimal welding, reinforcing the cabin safety through increased rigidity. This type of modification is required on most racing circuits for improved driver protection. In order to install a complete roll cage, you'll also need the appropriate strut kit (sold separately)--or save time by simply ordering the complete roll bar hoop and strut assembly package. Match your vehicle to the support bars needed to ensure a secure cockpit design. Roll Bar Type:Drag race Roll Bar Style:Hoop only Number of Mounting Points:2-point Tube Diameter (in):1.750 in. Wall Thickness (in):0.134 in. Welding Required:Yes Roll Bar Material:Mild steel Roll Bar Finish:Natural Quantity:Sold individually. Notes:Fits hardtop applications only. Includes the main hoop only. To make a complete 8-point roll cage, you will need to purchase the 8-point strut kit. See the "Required Parts" tab.
Item#:
117-C3125
Manufacturer Item:
C3125
Manufacturer:
Competition Engineering
You must be logged in to order this item. Log in here
PARACHUTE ANCHOR MOUNT
These Competition Engineering parachute anchor mounts weld to your chassis to hook up the strap from your parachute. They are manufactured from 1 5/8 in. diameter mild steel tubing and include the anchor strap bushing and bracket. The mounts require the use of the parachute pack system, also available from Competition Engineering. Parachute Mount Material:Mild steel Parachute Mount Finish:Natural Mounting Hardware Included:Yes Welding Required:Yes Quantity:Sold as a kit.
Item#:
117-C3450
Manufacturer Item:
C3450
Manufacturer:
Competition Engineering
You must be logged in to order this item. Log in here
PARACHUTE PACK MOUNT
These Competition Engineering parachute pack mounts will allow you to position the parachute where you need to. They include a quick-release pin and tubing to mount the parachute. The mounts do require welding for installation. Parachute Mount Material:Mild steel Parachute Mount Finish:Natural Mounting Hardware Included:Yes Welding Required:Yes Quantity:Sold as a kit.
Item#:
117-C3451
Manufacturer Item:
C3451
Manufacturer:
Competition Engineering
You must be logged in to order this item. Log in here
PARACHUTE RELEASE CABLE KIT
Competition Engineering parachute release systems give you everything you need to pull your parachute correctly. They include an 18 ft. cable, an aluminum release lever, and the required mounting hardware. Just add the parachute, and you're on your way to rapid deceleration. Release Handle Included:Yes Release Handle Material:Aluminum Release Cable Included:Yes Release Cable Length (ft):18 ft. Mounting Brackets Included:Yes Mounting Hardware Included:Yes Cable Clamps Included:No Grommets Included:No Quantity:Sold as a kit.
Item#:
117-C3452
Manufacturer Item:
C3452
Manufacturer:
Competition Engineering
You must be logged in to order this item. Log in here
View: