|◀ 1 - 12 of 487 ▶|
View:
High quality stainless steel f

Features:

  • 1/2" Barbed Inlet
  • Made from 316 Stainless Steel
  • Includes sealing washer
Item#:
244-FPE-CP3-FEED
Manufacturer Item:
FPE-CP3-FEED
Manufacturer:
Fleece Performance
You must be logged in to order this item. Log in here

Features:

  • High Quality AN fittings
  • Extra Flexible Smooth Bore Tefllon Hose
Item#:
244-FPE-CRTFL-OE
Manufacturer Item:
FPE-CRTFL-OE
Manufacturer:
Fleece Performance
You must be logged in to order this item. Log in here

Features: 

  • High Quality AN fittings
  • Extra Flexible Smooth Bore Tefllon Hose
Item#:
244-FPE-CRTFL-S3S4
Manufacturer Item:
FPE-CRTFL-S3S4
Manufacturer:
Fleece Performance
You must be logged in to order this item. Log in here

The kit includes everything you need to properly route, plumb and filter fuel for your Cummins engine from a Fleece Performance lift pump to the injection pump.  Our kit improves accessibility to the fuel filter as well as reduces your ongoing maintenance cost with a lower cost Donaldson filter.

Fleece Performance fuel filter delete is required for use with this product and must already be installed or purchased separately. This kit does not include a quick disconnect fitting to adapt to the OE lift pump. If you are running this to a stock OE sending unit on the fuel tank use P/N: FPE-QUCON-OE-38 to allow for an AN connection to the stock quick disconnect style fitting.  

Kit includes: 

  • Donaldson 3 micron fuel filter and water separator
  • Filter base with integral mounting
  • Distribution filter block / filter coupler
  • Push Lock hose and all necessary AN and barb fittings
  • CP3 Feed fittings for 5.9L and 6.7L

  

Visit our Resources page for installation instructions. 

Item#:
244-FPE-34783
Manufacturer Item:
FPE-34783
Manufacturer:
Fleece Performance
You must be logged in to order this item. Log in here
High quality stainless steel f

Features:

  • 3/8" Barbed Outlet
  • Made from 316 Stainless Steel
  • Includes sealing washer
Item#:
244-FPE-CP3-RTRN
Manufacturer Item:
FPE-CP3-RTRN
Manufacturer:
Fleece Performance
You must be logged in to order this item. Log in here
The 5.9L CumminsPowerFlo 750 i
The Fleece Performance Cummins PowerFlo 750 CP3 is a straight forward, no inflated numbers, CP3 upgrade proven to support 750 RWHP with the proper complimenting modifications. Not only will it support 750 RWHP, but it also eliminates the factory fuel flow restiction that begins at 3,000 RPM. If you have a stock CP3 pump you are losing fuel flow and rail pressure after 3000 RPM, which correlates to lost horsepower when you need it most. This cost effective upgrade will allow you to maintain desired fuel rail pressure through your entire RPM range, as well as provide enough fuel to support 750rwhp. Every Fleece Performance CP3 is tested on our in-house engine simulator and pump test stand to simulate real world situations and ensure that each pump is ready to work for you!
Item#:
244-CUMMCP3-10MM-5.9
Manufacturer Item:
CUMM-CP3-10MM-5.9
Manufacturer:
Fleece Performance
You must be logged in to order this item. Log in here
The Fleece Performance Dual Pump Kit Hardware Kit for the 6.7L Cummins is designed to fit perfectly and comes with everything you need to get the job done right the first time with a simple and clean install. Our dual pump kit mounts the second pump on the front cover giving you a low profile look. Unlike our competitor's kits, this mounting configuration does not require removal of the second pump when removing or replacing the engine head. Our exclusive pump-to-pump line also makes for a cleaner installation that requires no removing and remote mounting of the fuel rail pressure sensor.

Kit Contents:

Cummins Common Rail Dual CP3 Bracket
Cummins Heavy Duty Dual Pump Belt 
Fan Shroud Bracket
Dual Pump Pulley – Idler
Cummins Dual Pump Idler Pulley Spacer
Cummins Dual Pump Controller
High Pressure Dual Pump Line (CP3 to CP3)
High Pressure CP3 Fitting and Non-Return Valve
(6) M8x1.25 Flange Nuts 
(6) M8x1.25x50 Carriage Bolts
M10x1.5x40mm Flange Head Cap Screw
M10x1.5x25mm Flange Head Bolt
M8×1.25 Flange Head Cap Screw
M18x1.5 CP3 Nut  
Item#:
244-FPE-DPK-67-1318
Manufacturer Item:
FPE-DPK-67-1318
Manufacturer:
Fleece Performance
You must be logged in to order this item. Log in here
Dodge Diesel Trucks 03-07 L6-5.9L (td)
The BladeRunner intake manifold represents the next generation in intake manifold design. The BladeRunner intake manifold uses a unique MDV (Multiple Directional Vane) technology to guide the air through the manifold maximizing air flow. Constructed out of cast A356-T6 aluminum and uses a proprietary internal bolt design to help increase the flow and provide a solid seal void of leaks or deformaties. the BladeRunner comes with up to 5 ports for nitrous injections, gauges and other accessories used by hardcore enthusiasts. In recent testing the BladeRunner intake manifold outflowed the factory intake by 32.9% and produced 17hp and 50lbs. x ft torque at 1975rpm. This intake is specifically designed to provide increased intake volume and velocity.
Item#:
13-46-10011
Manufacturer Item:
46-10011
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
Eliminate the costly exhaust manifold cracks prevalent in the factory exhaust manifold. The aFe Bladerunner exhaust manifold for the popular 5.9L Dodge Ram Cummins sets the new standard. Constructed out of cast 304 stainless steel with a reinforcing rib for strength along the flange and ultra-thick wall flange at the port. The Bladerunner exhaust manifold out flowed the factory exhaust by 23-percent improving exhaust flow, performance and throttle response. This manifold also features 2 EGT probe ports, thick wall design for increased strength (0.25" vs 0.15" for the stock unit), matched ports and has a merged runner design to maximize maximize exhaust flow. Once you install this awesome exhaust manifold, you will feel improved turbo spool up times, improved throttle response and performance.
Item#:
13-46-40012
Manufacturer Item:
46-40012
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
Eliminate the costly exhaust manifold cracks prevalent in the factory exhaust manifold. The aFe BladeRunner exhaust manifold for the popular 98.5-02 5.9L Dodge Ram Cummins (24V) sets a new standard. In recent testing, this exhaust manifold outflowed the factory exhaust manifold by 50% improving performance and throttle response. The thick wall (0.25in. vs. 0.15in.) design increases strength eliminating warping and cracking. The matched ports and a merged runner design reduces exhaust backpressure, maximizing exhaust flow. Once you install this awesome exhaust manifold, you will feel improved turbo spool up times, improved throttle response and increased performance.
Item#:
13-46-40032
Manufacturer Item:
46-40032
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a built-in clear sight window to the massive 1,000cfm air filter and premium hardware, we spared no expense to give you the best intake on the market.
Item#:
13-50-72002
Manufacturer Item:
50-72002
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a built-in clear sight window to the massive 1,000cfm air filter and premium hardware, we spared no expense to give you the best intake on the market.
Item#:
13-50-72003
Manufacturer Item:
50-72003
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
|◀ 1 - 12 of 487 ▶|
View: