ACM series amplifiers by AudioControl are the perfect blend of power and features for car audio systems from mild to wild. Compact size, high power and the ability to help integrate with factory stereo systems are features that assure Making Good Sound Great can happen in any installation. Reversible cover plates allow flexible mounting options when paired with AudioControl DM Series Processors or when using multiple ACM series amplifiers in confined spaces. Once again AudioControl comes to the rescue combining features and benefits needed to assure audio euphoria in an automotive setting. features 300 watts @ 2 ohms 175 watts @ 4 ohms AccuBASS® Processing GTOTM Signal Sense Active speaker-level inputs for OEM integration RCA Line Inputs Linkwitz-Riley Crossover Optional ACR-1 remote level control Reversible Cover Plate Bulletproof 5 year warranty (when installed by an authorized AudioControl dealer)

ACM series amplifiers by AudioControl are the perfect blend of power and features for car audio systems from mild to wild. Compact size, high power and the ability to help integrate with factory stereo systems are features that assure Making Good Sound Great can happen in any installation. Reversible cover plates allow flexible mounting options when paired with AudioControl DM Series Processors or when using multiple ACM series amplifiers in confined spaces. Once again AudioControl comes to the rescue combining features and benefits needed to assure audio euphoria in an automotive setting. features 2 x 150 watts @ 2 ohms 2 x 75 watts @ 4 ohms 300 watts @ 4 ohms bridged GTOTM Signal Sense Active speaker-level inputs for OEM integration RCA Line Inputs Linkwitz-Riley Crossover Reversible Cover Plate Bulletproof 5 year warranty (when installed by an authorized AudioControl dealer)

ACM series amplifiers by AudioControl are the perfect blend of power and features for car audio systems from mild to wild. Compact size, high power and the ability to help integrate with factory stereo systems are features that assure Making Good Sound Great can happen in any installation. Reversible cover plates allow flexible mounting options when paired with AudioControl DM Series Processors or when using multiple ACM series amplifiers in confined spaces. Once again AudioControl comes to the rescue combining features and benefits needed to assure audio euphoria in an automotive setting. features 4 x 75 watts @ 2 ohms 4 x 50 watts @ 4 ohms 150 watts @ 4 ohms bridged GTOTM Signal Sense Active speaker-level inputs for OEM integration RCA Line Inputs Linkwitz-Riley Crossover Reversible Cover Plate Bulletproof 5 year warranty (when installed by an authorized AudioControl dealer)

high-power 4 channel dsp matrix amplifier with accubass® AudioControl has paired our award winning amplifier technology with our powerful Matrix DSP into the D-4.800. This single-unit solution provides unprecedented power and tuning flexibility when you require audio perfection from your factory or aftermarket sound system. The D-4.800 features active speaker level inputs, line-level inputs and outputs plus, using AudioControls DM Smart DSP app gives you complete control over all features including 30 bands of equalization, signal delay, input delay, polarity and AudioControl proprietary features like AccuBASS®, GTOTM Signal Sense, and MILCTM plus integrated input and output RTAs. Perfect for OEM integration and aftermarket builds, the D-4.800 packs power and intelligent flexibility into one beautiful cast aluminum chassis. features Built-in DSP Configurable as 4/3/2 channel amplifier 4 x 200 watts @ 2 ohms 4 x 125 watts @ 4 ohms 400 watts @ 4 ohms bridged AccuBASS® Processing MILCTM Maximum Input Level Control (Patent Pending) GTOTM Signal Sense Active speaker-level inputs (6 channels) for OEM integration 4 preamp inputs 2 assignable preamp outputs Solid One-Piece Aluminum Chassis Input and Output RTA for precise and informed tuning Input and Output Delay 12 and 24 dB/octave Linkwitz-Riley crossovers 30 band equalizer Optional ACR-3 remote for preset recall and level control DM Smart DSP app available in downloads for Mac/PC or Connect your laptop to the D-4.800 using AudioControls DM Smart DSP app, a fully featured Matrix DSP Interface designed to give you instant and clear control over every aspect of your processor. Route any input to any output, adjust gain, delay and polarity then precisely tune the D-4.800 using a 30 band EQ. High-pass, low-pass and band-pass can be set up for any output using 12 or 24 dB/octave Linkwitz-Riley crossovers. For OEM integration, take advantage of the input and output RTAs, available for every input and output, to easily identify and sum factory speaker signals. With a clear GUI and intuitive workflow, AudioControls DM Smart DSP app will take the guesswork out of tuning your system to your exact specifications. specifications inputs Preamp Inputs: 4 balanced Preamp Input Voltage Range: 250 mV  8 V RMS Speaker Level Inputs: 6 outputs Rated Continuous (RMS) Power at 14.4V: 4   125 W x 4 RMS 2   200 W x 4 RMS Bridged 4   400 W RMS Preamp Outputs: 2 Maximum Preamp Output: 8.5 V RMS performance Frequency Response: 20 Hz  24 kHz Signal to Noise: 102 dBA, Ref 200 W @ 2 Ohm THD+N: < 0.1% Power / Ground Wire Gauge: 8 to 3 AWG wire Fuse Rating: 2 x 40 A weights & dimensions Dimensions: 9.0W x 8.0D x 2.1H Weight: 5.0 lbs. (2.3kg) in the box: D-4.800, Speaker Connectors, Fuses, Manual, Warranty

When you demand the perfect blend of power and performance, AudioControl provides answers and the LC-1.800 is no exception. No matter the install, you can be assured power will meet and exceed expectations with 800 watts at 2 ohms. The mix of high level and low level inputs mean you have the widest input voltage range in the industry. AudioControls patented AccuBASS® circuit is the only way to properly overcome factory bass roll-off and heavily equalized factory bass settings. Enjoy loud, clean and articulate bass combined with the best warranty available with the LC-1.800 amplifier. features Subwoofer amplifier with patented AccuBASS® 800 watts @ 2 ohms 500 watts @ 4 ohms AccuBASS® Processing MILC Maximum Input Level Control (Patent Pending) GTO Signal Sense 24 dB/octave Linkwitz-Riley Alignment crossover Speaker level and preamp inputs Optional ACR-1 assignable remote control Solid One-Piece Aluminum Chassis specifications inputs Preamp Inputs: 2 balanced Input Voltage Range: 500 mV  6 Vrms outputs Rated Continuous (RMS) Power at 14.4V: 4   500 W RMS 2   800 W RMS performance Frequency Response: 10 Hz  30 kHz Signal to Noise: 102 dBa, Ref 500 W @ 4 Ohm Damping Factor: 670 at 10 V, 4 Ohm Output, 100 Hz THD+N: < 0.01% Minimum Power / Ground Wire Gauge: 3 AWG wire Fuse Rating: 2 x 40 A Crossover: 24 dB/octave Linkwitz-Riley, Adjustable From 30 Hz  230 Hz PFM Subsonic Filter: 24 Hz weights & dimensions Dimensions: 9W x 7.95D x 2.1H Weight: 5.0lbs (2.0kg) in the box: LC-1.800, Speaker connectors, Fuses, Manual, Warranty

Making Good Sound Great is our passion at AudioControl and that legacy continues with the LC-4.800 multi-channel amplifier. This unique high power design features six active speaker level inputs with summing allowing you to interface and integrate with most factory installed source units. The patent pending AccuBASS® circuit compensates for factory bass roll-off and provides maximum bass performance. More control and features include our GTO signal Sense, Configurable Crossovers and assignable remote level control. We have incorporated years of technology into the LC-4.800 making this a perfect solution based amplifier. features Configurable as 4/3/2 channel amplifier 4 x 200 watts @ 2 ohms 4 x 125 watts @ 4 ohms 400 watts @ 4 ohms bridged AccuBASS® Processing MILC Maximum Input Level Control (Patent Pending) GTO Signal Sense Independent Linkwitz-Riley Alignment crossovers Summable active speaker-level inputs (6 channels) for OEM integration 4 preamp inputs 2 assignable preamp outputs PFM Subsonic Filter Optional ACR-1 assignable remote control Solid One-Piece Aluminum Chassis specifications inputs Preamp Inputs: 4 balanced Input Voltage Range: 250 mV  8 V RMS outputs Rated Continuous (RMS) Power at 14.4V: 4   125 W x 4 RMS 2   200 W x 4 RMS Bridged 4   400 W RMS Preamp Outputs: 2 Maximum Preamp Output: 8.5 V RMS performance Frequency Response: 10 Hz  30 kHz Signal to Noise: 102 dBa, Ref 200 W @ 2 Ohm THD+N: < 0.1% Minimum Power / Ground Wire Gauge: 3 AWG wire Fuse Rating: 2 x 40 A Crossover: Linkwitz-Riley, Adjustable From 30 Hz  300 Hz weights & dimensions Dimensions: 9W x 7.95D x 2.1H Weight: 5.0lbs (2.0kg) in the box: LC-4.800, Speaker connectors, Fuses, Manual, Warranty

Building from the hugely successful LC-4.800 multi-channel amplifier, the LC-6.1200 is surely the most flexible 6 channel amplifier on the market. Featuring eight active speaker level inputs with summing, coupled with an intuitive three-way Linkwitz-Riley crossover network, the LC-6.1200 can be easily integrated with most factory installed source units. The patented AccuBASS® circuit compensates for factory bass roll-off and provides maximum bass performance. More control and features include our GTO Signal Sense, MILC Source Clip Detection and assignable Remote Level Control. The LC-6.1200 builds on the legacy of audio passion and a focus on user-friendly features, making this a perfect solution based amplifier. features Configurable as 6/5/4/3/2 channel amplifier 6 x 200 watts @ 2 ohms 6 x 125 watts @ 4 ohms 400 watts @ 4 ohms bridged AccuBASS® Processing MILCTM Maximum Input Level Control (Patent Pending) GTOTM Signal Sense 3-way Independent Linkwitz-Riley Alignment crossovers Summable active speaker-level inputs (8 channels) for OEM integration 6 preamp inputs 2 assignable preamp outputs PFM Subsonic Filter Optional ACR-1 assignable remote control Solid One-Piece Aluminum Chassis specifications inputs Preamp Inputs: 6 balanced Preamp Input Voltage Range: 250 mV  8 V RMS Speaker Level Inputs: 8 outputs Rated Continuous (RMS) Power at 14.4V: 4   125 W x 6 RMS 2   200 W x 6 RMS Bridged 4   400 W RMS Preamp Outputs: 2 Maximum Preamp Output: 8.5 V RMS performance Frequency Response: 10 Hz  30 kHz Signal to Noise: 102 dBa, Ref 200 W @ 2 Ohm THD+N: < 0.1% Minimum Power / Ground Wire Gauge: 3 AWG wire Fuse Rating: 3 x 40 A Crossover: 3-way Linkwitz-Riley, Adjustable From 30 Hz  5000 Hz weights & dimensions Dimensions: 12W x 8.0D x 2.1H Weight: 7.2lbs. (3.3kg) in the box: LC-6.1200, Speaker Connectors, Fuses, Manual, Warranty

Distortion: | THD 4(1KHz@4ohm) : 0.3% | S/N Ratio: < 90 dBA | Low Input Level: 150mV - 5.0V | Crossover(-24dB/Oct) | Variable Low-Pass: 35-350Hz @ 12dB / Oct | Variable Sub-Sonic: 15-75Hz @18dB/Oct | 12dB @ 45Hz | | Dimensions: | Length x Width x Height(Inches): 11.81" x 2" x 7.67" |

Distortion: | THD 4(1KHz@4ohm) : 0.3% | S/N Ratio: < 100 dBA | Low Input Level: 150mV - 5.0V | Crossover(-24dB/Oct) | Variable High-Pass: 35-350Hz @ 12dB / Oct | Variable Low-Pass: 35-350Hz @ 12dB / Oct | Variable Sub-Sonic: 15-75Hz @18dB/Oct | 12dB @ 45Hz | | Dimensions: | Length x Width x Height(Inches): 12.6" x 2" x 7.67"

Distortion: | THD 4(1KHz@4ohm) : 0.06% | S/N Ratio: < 100 dBA | Low Input Level: 150mV - 5.0V | Crossover(-24dB/Oct) | Variable High-Pass: 35-350Hz @ 12dB / Oc | Variable Low-Pass: 35-350Hz @ 12dB / Oct | 12dB @ 45Hz | Dimensions: | Length x Width x Height(Inches): 11.81" x 2" x 7.67"

Distortion: | THD 4(1KHz@4ohm) : 0.06% | S/N Ratio: < 100 dBA | Low Input Level: 150mV - 5.0V | Crossover(-24dB/Oct) | Variable High-Pass: 35-350Hz @ 12dB / Oc | Variable Low-Pass: 50-250Hz @ 12dB/Oc | Dimensions: | Length x Width x Height(Inches): 11.81" x 2" x 7.67"

Distortion: | THD 4(1KHz@4ohm) : 0.3% | S/N Ratio: < 90 dBA | Low Input Level: 150mV - 5.0V | Crossover(-24dB/Oct) | Variable Low-Pass: 35-350Hz @ 12dB / Oct | Variable Sub-Sonic: 15-75Hz @18dB/Oct | 12dB @ 45Hz | Dimensions: | Length x Width x Height(Inches): 11.81" x 2" x 7.67"