|◀ 1 - 12 of 4948 ▶|
View:
FUEL PUMP, DOMINATOR LOW FLOW ELECTRIC
Need to feed some serious horsepower? Have a nitrous or forced induction powerplant that also sees street duty? Holley's Dominator in-line fuel pumps are the answer! The patent pending twin pump design allows you to use one pump for cruising and both pumps when you activate the nitrous switch or start building boost! By staging the second pump, you eliminate the unnecessary recirculating and heating of extra fuel which can lead to poor performance and hot fuel issues. As an added benefit for the hard core enthusiasts that run events like Hot Rod Power Tour and the Baja 1000, the extra pump offers the peace of mind that you will always finish what you start! For hard core race vehicles, both pumps can be wired for full time duty to get maximum performance and are proven with 18.5 volt compatibility at pressures up to 80 psi. Holley engineers have designed 12-1200 to feature improved hot fuel handling capabilities. It was designed to greatly reduce the negative effects of heated fuel now common with many of today's pump gas blends. It is available for use with pump gas or race gas. If you are using E-85 or diesel, no need to worry, Holley has still got you covered with the 12-1800 Dominator Fuel Pump. At only 5.1 lbs, they weigh half a pound less than competitive 1000+ horsepower pumps yet have twice the features!
Item#:
272-12-1200
Manufacturer Item:
12-1200
Manufacturer:
Holley
You must be logged in to order this item. Log in here
125 HP FUEL PUMP BILLET BASE GEROTOR
Looking for a fuel pump that is quiet, stylish, powerful and dependable? Look at the Holley HP 125 and HP 150 series fuel pumps. The exclusive gerotor gearset quietly and efficiently pumps the fuel without the noise of traditional vane pumps. The chrome motor and trick powder coated bracket match the mil-spec hard anodized base for unmatched beauty and durability. While these pumps have the capability to feed stout race engines, they are equally at home on the street due to their design and construction techniques.
Item#:
272-12-125
Manufacturer Item:
12-125
Manufacturer:
Holley
You must be logged in to order this item. Log in here
12 BOLT FLANGE 450 LPH PUMP SINGLE
Holley is excited to introduce our Holley Fuel Cell EFI Pump Modules. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator. The modules were designed to drop in as a direct replacement for your existing 6 or 12 bolt flange fuel cell cap assembly. The billet top flange includes an 8AN inlet port, a 10AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5" to 12" deep. The EFI modules are available with single 255 LPH and 450 LPH fuel pumps. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.
Item#:
272-12-146
Manufacturer Item:
12-146
Manufacturer:
Holley
You must be logged in to order this item. Log in here
12 BOLT FLANGE 450 LPH PUMP DUAL
Holley is excited to introduce our Holley Fuel Cell EFI Pump Modules. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator. The modules were designed to drop in as a direct replacement for your existing 6 or 12 bolt flange fuel cell cap assembly. The billet top flange includes an 8AN inlet port, a 10AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5" to 12" deep. The EFI modules are available with single and dual 255 LPH and 450 LPH fuel pumps. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.
Item#:
272-12-147
Manufacturer Item:
12-147
Manufacturer:
Holley
You must be logged in to order this item. Log in here
150 HP FUEL PUMP BILLET BASE GEROTOR
Looking for a fuel pump that is quiet, stylish, powerful and dependable? Look at the Holley HP 125 and HP 150 series fuel pumps. The exclusive gerotor gearset quietly and efficiently pumps the fuel without the noise of traditional vane pumps. The chrome motor and trick powder coated bracket match the mil-spec hard anodized base for unmatched beauty and durability. While these pumps have the capability to feed stout race engines, they are equally at home on the street due to their design and construction techniques. Gerotor design for smooth operation and durability Flows 150 GPH free flow Flows 140 GPH at 7 psi Powers engines from stock all the way up to 900 horsepower (Gasoline) 3/8" NPT inlet & outlet fittings Not designed for use on aircraft of any type. Black mil-spec nickel PTFE hard anodized billet base Show quality chrome 12v motor Profiled black powdercoated mounting bracket Laser engraved Holley logo & inlet/outlet markings Less noise than traditional vane pumps 6 1/4" tall Compatible with gasoline or alcohol Relay kit P/N 12-753 recommended
Item#:
272-12-150
Manufacturer Item:
12-150
Manufacturer:
Holley
You must be logged in to order this item. Log in here
FUEL PUMP, DOMINATOR GAS ONLY
Need to feed some serious horsepower? Have a nitrous or forced induction powerplant that also sees street duty? Holley's Dominator in-line fuel pumps are the answer! The patent pending twin pump design allows you to use one pump for cruising and both pumps when you activate the nitrous switch or start building boost! By staging the second pump, you eliminate the unnecessary recirculating and heating of extra fuel which can lead to poor performance and hot fuel issues. As an added benefit for the hard core enthusiasts that run events like Hot Rod Power Tour and the Baja 1000, the extra pump offers the peace of mind that you will always finish what you start! For hard core race vehicles, both pumps can be wired for full time duty to get maximum performance and are proven with 18.5 volt compatibility at pressures up to 80 psi. Holley engineers have designed 12-1600 to feature improved hot fuel handling capabilities. It was designed to greatly reduce the negative effects of heated fuel now common with many of today's pump gas blends. It is available for use with pump gas or race gas. If you are using E-85 or diesel, no need to worry, Holley has still got you covered with the 12-1800 Dominator Fuel Pump. At only 5.1 lbs, they weigh half a pound less than competitive 1000+ horsepower pumps yet have twice the features! Improved hot fuel handling Billet aluminum construction for durability and good looks 10 AN O-ring inlet/outlet for high flow and superior sealing Excellent for use with carbureted or EFI applications Fully submersible in-tank for custom applications, space savings and less plumbing Compatible with 12v to 18.5v systems for street or race use Compact (7.66 Long x 5 Wide x 2.5 Tall) for easy installation on frame rails or other tight areas Twin pump design allows the use of both pumps simultaneously or independently - second pump can be activated on demand for power adders such as nitrous or boost Patent pending dual pump technology Proven durability beyond 3,000 hours in gasoline Weighs only 5.1 lbs. Max Current draw is 28 Amps Not designed for use on aircraft of any type.
Item#:
272-12-1600
Manufacturer Item:
12-1600
Manufacturer:
Holley
You must be logged in to order this item. Log in here
MECH FUEL PUMP FORD SB 110GHP
Holley mechanical fuel pumps range from 80 GPH to 225 GPH in many various applications to meet the fuel demands of most engines. Whether you are looking for a street performance or an all out race mechanical fuel pump, Holley has the pump you need. High output fuel flow Flows 110 GPH free flow Shutoff pressure pre-set from 6.5 to 8 psi Fuel pressure regulator is not required Heavy duty construction for continuous high rpm operation Fuel body casting can be rotated to accommodate various plumbing situations Inlet & outlet tapped for 3/8" NPT
Item#:
272-12-289-11
Manufacturer Item:
12-289-11
Manufacturer:
Holley
You must be logged in to order this item. Log in here
OEM TANK HANGAR 67-69 CAMARO/FIREBIRD
 This in-tank fuel pump module is a high-pressure unit that flows 255 liters per hour (LPH) and is capable of supporting electronic fuel injection (EFI) engines producing up to 550 horsepower  A pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for this application is included  This module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates Fuel pressure is internally regulated to 58 psi eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator - no separate return line is required because this module returns excess fuel right inside the tank! This 1967-69 GM F-body Muscle Car EFI Fuel Pump module was designed as a direct replacement for your factory pick-up and sending unit. There is no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line - just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line. This Muscle Car EFI Module includes a 255 LPH fuel pump and a Holley HydraMat. HydraMat is an amazing patent-pending fuel reservoir system that reduces fuel starvation issues that might otherwise occur while cornering, accelerating, stopping, traversing inclines, and during low fuel conditions.
Item#:
272-12-300
Manufacturer Item:
12-300
Manufacturer:
Holley
You must be logged in to order this item. Log in here
OEM TANK HANGAR 64 - 67 CHEVELLE, MALIBU
 This in-tank fuel pump module is a high-pressure unit that flows 255 liters per hour (LPH) and is capable of supporting electronic fuel injection (EFI) engines producing up to 550 horsepower  A pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for this application is included  This module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates Fuel pressure is internally regulated to 58 psi eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator - no separate return line is required because this module returns excess fuel right inside the tank! This 1964-67 GM A-body Muscle Car EFI Fuel Pump module was designed as a direct replacement for your factory pick-up and sending unit. There is no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line - just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line. This Muscle Car EFI Module includes a 255 LPH fuel pump and a Holley HydraMat. HydraMat is an amazing patent-pending fuel reservoir system that reduces fuel starvation issues that might otherwise occur while cornering, accelerating, stopping, traversing inclines, and during low fuel conditions.
Item#:
272-12-302
Manufacturer Item:
12-302
Manufacturer:
Holley
You must be logged in to order this item. Log in here
OEM TANK HANGAR 68-72 CHEVELLE, ELCAMINO
 This in-tank fuel pump module is a high-pressure unit that flows 255 liters per hour (LPH) and is capable of supporting electronic fuel injection (EFI) engines producing up to 550 horsepower  A pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for this application is included  This module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates Fuel pressure is internally regulated to 58 psi eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator - no separate return line is required because this module returns excess fuel right inside the tank! This 19-68-72 GM A-body Muscle Car EFI Fuel Pump module was designed as a direct replacement for your factory pick-up and sending unit. There is no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line - just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line. This Muscle Car EFI Module includes a 255 LPH fuel pump and a Holley HydraMat. HydraMat is an amazing patent-pending fuel reservoir system that reduces fuel starvation issues that might otherwise occur while cornering, accelerating, stopping, traversing inclines, and during low fuel conditions.
Item#:
272-12-303
Manufacturer Item:
12-303
Manufacturer:
Holley
You must be logged in to order this item. Log in here
OEM TANK HANGAR 74-81 CAMARO/FIREBIRD
 This in-tank fuel pump module is a high-pressure unit that flows 255 liters per hour (LPH) and is capable of supporting electronic fuel injection (EFI) engines producing up to 550 horsepower  A pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for this application is included  This module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates Fuel pressure is internally regulated to 58 psi eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator - no separate return line is required because this module returns excess fuel right inside the tank! This 1977-81 F-body Muscle Car EFI Fuel Pump module was designed as a direct replacement for your factory pick-up and sending unit. There is no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line - just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line. This Muscle Car EFI Module includes a 255 LPH fuel pump and a Holley HydraMat. HydraMat is an amazing patent-pending fuel reservoir system that reduces fuel starvation issues that might otherwise occur while cornering, accelerating, stopping, traversing inclines, and during low fuel conditions.
Item#:
272-12-304
Manufacturer Item:
12-304
Manufacturer:
Holley
You must be logged in to order this item. Log in here
OEM TANK HANGAR 64-68 MUSTANG
 This in-tank fuel pump module is a high-pressure unit that flows 255 liters per hour (LPH) and is capable of supporting electronic fuel injection (EFI) engines producing up to 550 horsepower  A pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for this application is included  This module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates Fuel pressure is internally regulated to 58 psi eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator - no separate return line is required because this module returns excess fuel right inside the tank! This 1964-70 Mustang Muscle Car EFI Fuel Pump module was designed as a direct replacement for your factory pick-up and sending unit. There is no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line - just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line. This Muscle Car EFI Module includes a 255 LPH fuel pump and a Holley HydraMat. HydraMat is an amazing patent-pending fuel reservoir system that reduces fuel starvation issues that might otherwise occur while cornering, accelerating, stopping, traversing inclines, and during low fuel conditions. This new kit has all of the extra components to fit all three sizes of Mustang fuel tanks from 1964-1970. You choose which fuel gauge float arm for your factory fuel tank size! Fitment: 1964-68 Mustang -16 gallon tank 1969 Mustang- 20 gallon tank 1970 Mustang- 22 gallon tank
Item#:
272-12-305
Manufacturer Item:
12-305
Manufacturer:
Holley
You must be logged in to order this item. Log in here
|◀ 1 - 12 of 4948 ▶|
View: