|◀ 1 - 12 of 18425 ▶|
View:
Features:

- The Male end of these adapter fittings are designed to thread into an M18 x 1.5 Female Exhaust Sensor Bung.
- Manufactured entirely from 304 Stainless Steel.
- 1 set per bag.
Item#:
574-19999
Manufacturer Item:
19999
Manufacturer:
Vibrant
You must be logged in to order this item. Log in here
2.5-inch No-Weld O2 Sensor Mount, Allows Users to Install O2 Sensor(s) With
No welding equipment? No problem with AEM's No-Weld O2 Sensor Mounts. These mounts have an integrated bung that makes it easy to install a wideband UEGO air/fuel ratio sensor using just a drill and the supplied hardware. Fits 1.75" to 3.5" exhaust pipe diameters. See the purchase tab for sizing and part numbers.
Item#:
2-30-2355-250
Manufacturer Item:
30-2355-250
Manufacturer:
AEM Electronics
You must be logged in to order this item. Log in here
3-inch No-Weld O2 Sensor Mount, Allows Users to Install O2 Sensor(s) Withou
No welding equipment? No problem with AEM's No-Weld O2 Sensor Mounts. These mounts have an integrated bung that makes it easy to install a wideband UEGO air/fuel ratio sensor using just a drill and the supplied hardware. Fits 1.75" to 3.5" exhaust pipe diameters. See the purchase tab for sizing and part numbers.
Item#:
2-30-2355-300
Manufacturer Item:
30-2355-300
Manufacturer:
AEM Electronics
You must be logged in to order this item. Log in here
Dodge/RAM 1500 09-18 / RAM 1500 Classic 2019 V8-5.7L HEMI
The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
Item#:
13-49-42013-P
Manufacturer Item:
49-42013-P
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
Introducing an all new Rebel Series Dual Center Exit Cat-Back exhaust system for the Jeep Wrangler (JK) with V6-3.6L/3.8L engine. This unique Rebel Series exhaust system is designed with dual center exit tips for an aggressive look. The Tips are 4-1/2" with aFe power plates and constructed out of stainless steel for durability. This performance cat-back exhaust is constructed of 2-1/2" MIG-welded mandrel-bent stainless steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. In testing, this cat-back exhaust system added an astounding +9 horsepower and +14 lbs. x ft. of torque as verified by our in house dyno. This exhaust system comes complete with a 22" free-flowing muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation.
Item#:
13-49-43078-B
Manufacturer Item:
49-43078-B
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
This Rebel Series cat-back is designed with dual black exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe Power logos on the side and are constructed from stainless steel for durability. The exhaust system is constructed from 3" MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system. 3-1/2" Dia. Black Middle-Side Exit Tips: Finishing off the exhaust are dual 3-1/2" diameter black 304 stainless steel clamp-on tips with a laser-etched aFe power logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look. Installation Is A Snap: This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the ha nger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.
Item#:
13-49-43091-B
Manufacturer Item:
49-43091-B
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
aFe power introduces an all new Rebel Series dual middle-side exit exhaust system. cat-back is designed with dual polished exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe Power logos on the side and are constructed from stainless steel for durability. The exhaust system is constructed from 3" MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system. 3-1/2" Dia. Polished Middle-Side Exit Tips: Finishing off the exhaust are dual 3-1/2" diameter polished 304 stainless steel clamp-on tips with a laser-etched aFe power logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look. Installation Is A Snap: This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.
Item#:
13-49-43091-P
Manufacturer Item:
49-43091-P
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
Item#:
13-49-44012-B
Manufacturer Item:
49-44012-B
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
Item#:
13-49-44039-B
Manufacturer Item:
49-44039-B
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
If you are looking for a highly engineered down pipe look no further than the aFe Power Mach Force XP Down Pipe. Down pipe is 100 percent TIG welded and uses a stepped design that increases exhaust velocity and eliminates low pressure drops which helps to scavange the exhaust for increased intake charge and more power. Race proven strength and durability. Designed using a resonance chamber to help reduce the in-cab resonance found with other down pipes. All hardware and brackets are included for a hassle-free installation.
Item#:
13-49-46220
Manufacturer Item:
49-46220
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
Nothing looks cooler than a huge tip completing your exhaust system. The aFe Power tip is constructed out of high luster, polished 304 stainless steel and has a slash cut and an aFe Power logo lazer etched into the top of the tip. A drain port on the bottom keeps rust and corrosion away.
Item#:
13-49-90002
Manufacturer Item:
49-90002
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
Nothing looks cooler than a huge tip completing your exhaust system. The aFe Power tip is constructed out of high luster, polished 304 stainless steel and has a slash cut and an aFe Power logo lazer etched into the top of the tip. A drain port on the bottom keeps rust and corrosion away.
Item#:
13-49-92023-B
Manufacturer Item:
49-92023-B
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
|◀ 1 - 12 of 18425 ▶|
View: