|◀ 1 - 12 of 2981 ▶|
View:
AIR CLEANER - 14 CHROME DEMON Demon Branded 14" Chrome Air Filter with pape
Dress up your engine with the Demon 14" chrome plated air cleaner assembly. This cleaner is a perfect complement to your Demon carburetor product Features: 14 inches in diameter 3 in deep paper filter element Triple chrome plate finish Low profile for ease of use with stock hoods Two securing studs are supplied: 1/4in x 20tpi (Street Demon) and 5/16in by 18tpi (all other Demons) Tri-lobe wing nut is counter-bored and furnished with 1/4in and 5/16in internal threads Demon logo stamped into the top
Item#:
36-786004
Manufacturer Item:
786004
Manufacturer:
Holley
You must be logged in to order this item. Log in here
AIR CLEANER - 14 CHROM HOLLEY
Dress up your engine with Holley's 14" Chrome Plated Round Air Cleaner Assembly.
Item#:
272-120-102
Manufacturer Item:
120-102
Manufacturer:
Holley
You must be logged in to order this item. Log in here
MOUNTING BRACKET FOR 100 GPH FILTERS (38
Holley's fuel filter mounting brackets are designed to fit the HP billet fuel filter line. They provide a easy way to securely mount the fuel filter while providing good looks. Available in polished aluminum or black anodized aluminum.
Item#:
272-162-573
Manufacturer Item:
162-573
Manufacturer:
Holley
You must be logged in to order this item. Log in here
MOUNTING BRACKET FOR 175 & 260GPH FILTER
Holley's fuel filter mounting brackets are designed to fit the HP and VR Series Billet fuel filter line. They provide a easy way to securely mount the fuel filter while providing good looks. Available in polished aluminum or black anodized aluminum.
Item#:
272-162-574
Manufacturer Item:
162-574
Manufacturer:
Holley
You must be logged in to order this item. Log in here
HI ACC BKT KIT, LS/LT, WRKS W/SD-NATURAL
The most cost effective LS bracket solution on the market! Universal brackets fit virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products Simple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets Utilizes commonly available and affordable GM alternators, power steering pumps and A/C compressors A/C brackets position the compressor high above the cross-member but below the hood line for easy installation and great looks A/C brackets are also a bolt on solution to relocate A/C compressor on engines using a GM Corvette accessory drive system A/C bracket accepts GM R4 compressor (Sanden version now available)
Item#:
272-20-132
Manufacturer Item:
20-132
Manufacturer:
Holley
You must be logged in to order this item. Log in here
HI PASS BKT KIT, LS/LT, WRKS W/R4-NATURA
 The most cost effective LS bracket solution on the market!  Universal bracket, fits virtually all common LS engines regardless of water pump and harmonic balancer offsets reducing cost and complexity compared to competitive products  Simple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets  Utilizes commonly available and affordable GM A/C compressors  Positions the compressor high above the cross-member but below the hood line for easy installation and great looks  Bolt-on solution to relocate A/C compressor on engines using a GM Corvette accessory drive system  Accepts GM R4 compressor (Sanden version now available)  OEM quality natural finish die casting for clean looks and durability. Can be polished, coated, painted or plated.  OEM spec flanged head hardware included to match your factory LS engine hardware  Complete accessory drive kits include all components and accessories are also available  Ideal for crate engines, take out motors and engine builders!
Item#:
272-20-133
Manufacturer Item:
20-133
Manufacturer:
Holley
You must be logged in to order this item. Log in here
COMP HI BKT KIT, LT, W/SD7-NATURAL
GM has updated its V8 performance engines and launched the new Gen V LT1 direct injected engine as a replacement for the very popular LS series of engines. This new accessory drive bracket installation kit allows the use of our popular & reliable Holley LS accessory drive bracket systems to be installed on the new LT1 engine. This drive system has incorporated an upgrade to the conventional looking and central located LS water pump which works in conjunction with an OEM LT1 truck harmonic balancer. This application fits all LT1 style engines (except the dry sump and supercharged applications). This new installation kit includes spacers for the LS style brackets, water pump spacers, a solenoid re-clocking retainer ring, re-routed front harness, and all hardware. This new installation kit works with existing LS accessory drive brackets, accessories, LS Camaro style water pump, and LT1 truck harmonic balancer.
Item#:
272-20-170
Manufacturer Item:
20-170
Manufacturer:
Holley
You must be logged in to order this item. Log in here
COMP MID-MT ACC SYSTEM, LS-NATURAL
Holley's Mid-Mount complete accessory system has all accessories pulled in tighter than other accessory drives. At the heart of the system is a "bracketless" design (Patent Pending), where the accessories bolt directly to the water pump for a clean, integrated form. The design offers superb engine visibility to show off your horsepower, not your accessories. Among the many swap friendly features are bottom heater outlets for clearance in tight applications. The Holley designed alternator is just as innovative. This premium alternator utilizes 6-phase technology as found on the C7 Corvette. The water pump also shares its design efficiencies with that of the C7 Corvette. The compact and reliable SD7 A/C compressor and Type II P/S pump with baffled reservoir are also integrated. The Mid-Mount drive completes Holley's trilogy of accessory solutions giving a third option compared to the High and Low-Mount previously released. All three accessory solutions are for LS engines. When we say "complete", we mean complete. The Mid-Mount system comes with everything you need. All accessories are included; the water pump, A/C compressor, Alternator, P/S pump with reservoir, and the crank damper. All pulleys and the belt are supplied. Even heater hose adapters, power steering to -6 AN hardline, and the alternator plug/harness are included. Easy assembly was a priority during the entire development of this accessory solution. Color graphical instructions walk you through every step of the ultra-easy installation.
Item#:
272-20-185
Manufacturer Item:
20-185
Manufacturer:
Holley
You must be logged in to order this item. Log in here
COMP MID-MT ACC SYSTEM, LS-BLACK
Holley's Mid-Mount complete accessory system has all accessories pulled in tighter than other accessory drives. At the heart of the system is a "bracketless" design (Patent Pending), where the accessories bolt directly to the water pump for a clean, integrated form. The design offers superb engine visibility to show off your horsepower, not your accessories. Among the many swap friendly features are bottom heater outlets for clearance in tight applications. The Holley designed alternator is just as innovative. This premium alternator utilizes 6-phase technology as found on the C7 Corvette. The water pump also shares its design efficiencies with that of the C7 Corvette. The compact and reliable SD7 A/C compressor and Type II P/S pump with baffled reservoir are also integrated. The Mid-Mount drive completes Holley's trilogy of accessory solutions giving a third option compared to the High and Low-Mount previously released. All three accessory solutions are for LS engines. When we say "complete", we mean complete. The Mid-Mount system comes with everything you need. All accessories are included; the water pump, A/C compressor, Alternator, P/S pump with reservoir, and the crank damper. All pulleys and the belt are supplied. Even heater hose adapters, power steering to -6 AN hardline, and the alternator plug/harness are included. Easy assembly was a priority during the entire development of this accessory solution. Color graphical instructions walk you through every step of the ultra-easy installation.
Item#:
272-20-185BK
Manufacturer Item:
20-185BK
Manufacturer:
Holley
You must be logged in to order this item. Log in here
HI ACC BKT INSTALL KIT, LS LONG-NATURAL
Installation Kit, LS Acc. Drive Brackets, use with LONG belt alignment (alignment common on Trucks & '10-UP Camaro) Holley accessory drive installation kits provide proper spacing for Holley A/C, P/S & Alt accessory drive brackets, so belts ride at the perfect distance on your particular engine. A Fitment And Required Components Guide helps you locate and source components and provides other notes and helpful hints to figure your distance. Three easy steps will get you going. Step one is to determine your belt alignment based on your crank pulley position on the engine you have. Step two is to choose the Holley accessory drive brackets that you need (A/C, Alt & P/S or both). Step three is to see which Holley installation kit your set-up requires to line up your accessories with your crank pulley position. An application specific installation kit (part # 21-1, 21-2, or 21-3) is REQUIRED for most applications.
Item#:
272-21-3
Manufacturer Item:
21-3
Manufacturer:
Holley
You must be logged in to order this item. Log in here
LS COIL COVERS, BBC REPLICA
Do you own a vehicle with an LS based engine but love the looks of a classic Big-Block Chevy? Well now, thanks to Holley, you can give your LS a custom look with our LS Coil Covers. They're equally at home on a 2010 Camaro or LS swap muscle car, truck, or any ride needing to cover the factory LS coils. They're ready to paint so use your imagination! The LS Coil Covers are constructed from Glass Filled Nylon Composite for strength and durability. The covers are easily installed by using basic hand tools. Just replace a few coil bracket mount bolts with the included ball studs and snap the covers into place. Oil fill adapter and cap included OEM-style snap-on mounting Trim to fit your application Satin black and ready for custom paint to match your color scheme Ultra lightweight glass-filled nylon composite construction Cover those unsightly coil packs on your GM LS engine For LS2, LS3 & LS7 engines as well as other LS family engines using LS3 style coils & valve covers. *Coil cover may require minor trimming on typical hot rod or swap application. Use on OE applications may require more extensive trimming to clear
Item#:
272-242-1
Manufacturer Item:
242-1
Manufacturer:
Holley
You must be logged in to order this item. Log in here
The T.O.P. Racer from aFe is a patented design by aFe which allows air flow from the side and top of the filter in a single piece design. The T.O.P. Racer filter is uses a one-piece design that eliminates leaks and sealing failure under changing pressures. Air flows in from both top and side sections. This unit uses the Pro 5R media which is constructed of 5-layers of progressive cotton gauze to produce maximum flow. The T.O.P Racer filter is washable and reusable and has a 100 satisfaction guarantee.
Item#:
13-18-31403
Manufacturer Item:
18-31403
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
|◀ 1 - 12 of 2981 ▶|
View: