|◀ 1 - 12 of 880 ▶|
View:
1979-1995 MUSTANG HD ADJ CLUTCH CABLE & QUADRANT KIT
Since 1988 the BBK Performance brand has been synonymous with bolt on performance for modern muscle cars and trucks since its beginning in 1988. In fact it was our founders Brian & Ken Murphy that designed and developed the first aftermarket air intake systems & performance throttle bodies for the then newly fuel injected 5.0L Mustang and TPI Camaro models. Back then nobody even knew what an air intake or throttle body was because people were just learning about these modern day fuel injected pony cars Detroit began producing. Fast forward to today and many enthusiasts have only grown up on computer controlled fuel injection with a vocabulary full of upgrade items such as throttle body, air intake & mass air meter and have never driven a carbureted equipped vehicle. It?s this early experience and years of research & development, along with millions of dedicated enthusiasts that have allowed the BBK brand to grow into the largest source of modern day performance products for today?s cars & trucks. Starting from a 1200 ft building in Southern California, our BBK facilities have grown as fast as our product lines with nearly 200,000ft of state of the art design, manufacturing & distribution facilities located in California & Florida. Our R&D centers feature a total of three dyno cells and a team of highly skilled craftsman that also happen to be enthusiasts who really enjoy bringing the best performance products to market. Our manufacturing campus includes a top notch CNC machine division along with a state of the art exhaust division using a combination of skilled hand craftsmanship with a blend of CNC bending & robotic welding for maximum quality in every BBK product. Our moto is ?American Designed & Built? and it?s something the entire BBK team is proud of and will never change. If you are the owner of a modern day Dodge, Ford or GM vehicle and you are looking to upgrade your performance while maintaining OEM quality & drivability, you have come to the right place.
Item#:
35-1505
Manufacturer Item:
1505
Manufacturer:
BBK
You must be logged in to order this item. Log in here
Clutch Cable Firewall Adjuster
This BBK billet aluminum firewall clutch cable adjuster allows for additional adjustment of your clutch cable without getting under the car. Simply open the hood and adjust the clutch cable adjuster by hand. This BBK clutch cable adjuster allows for over 60% more adjustability than the cable alone.
Item#:
35-15050
Manufacturer Item:
15050
Manufacturer:
BBK
You must be logged in to order this item. Log in here
1979-1995 MUSTANG HD ADJ CLUTCH CABLE QUADRANT & FW ADJUSTER
These BBK Performance heavy duty adjustable clutch cable & CNC billet double adjustable aluminum quadrant kits also include an adjustable firewall adjuster for even more adjustability. This kit will eliminate sticky shifts and hard to find reverse gears. These kits are recommended when installing any aftermarket clutch but they will also work on ALL stock applications to give more adjustability. The OEM Style hard cased heavy duty fully adjustable cable and double set Aluminum quadrant are designed to replace the weak stock plastic quadrant that breaks easily especially when installing a heavy duty after market clutch that requires additional pedal pressure.
Item#:
35-15055
Manufacturer Item:
15055
Manufacturer:
BBK
You must be logged in to order this item. Log in here
1996-2004 MUSTANG GT/COBRA HD ADJ CLUTCH CABLE QUADRANT & FW ADJUSTER
Since 1988 the BBK Performance brand has been synonymous with bolt on performance for modern muscle cars and trucks since its beginning in 1988. In fact it was our founders Brian & Ken Murphy that designed and developed the first aftermarket air intake systems & performance throttle bodies for the then newly fuel injected 5.0L Mustang and TPI Camaro models. Back then nobody even knew what an air intake or throttle body was because people were just learning about these modern day fuel injected pony cars Detroit began producing. Fast forward to today and many enthusiasts have only grown up on computer controlled fuel injection with a vocabulary full of upgrade items such as throttle body, air intake & mass air meter and have never driven a carbureted equipped vehicle. It?s this early experience and years of research & development, along with millions of dedicated enthusiasts that have allowed the BBK brand to grow into the largest source of modern day performance products for today?s cars & trucks. Starting from a 1200 ft building in Southern California, our BBK facilities have grown as fast as our product lines with nearly 200,000ft of state of the art design, manufacturing & distribution facilities located in California & Florida. Our R&D centers feature a total of three dyno cells and a team of highly skilled craftsman that also happen to be enthusiasts who really enjoy bringing the best performance products to market. Our manufacturing campus includes a top notch CNC machine division along with a state of the art exhaust division using a combination of skilled hand craftsmanship with a blend of CNC bending & robotic welding for maximum quality in every BBK product. Our moto is ?American Designed & Built? and it?s something the entire BBK team is proud of and will never change. If you are the owner of a modern day Dodge, Ford or GM vehicle and you are looking to upgrade your performance while maintaining OEM quality & drivability, you have come to the right place.
Item#:
35-16095
Manufacturer Item:
16095
Manufacturer:
BBK
You must be logged in to order this item. Log in here
1979-1995 MUSTANG HD ADJUSTABLE CLUTCH CABLE ONLY
Since 1988 the BBK Performance brand has been synonymous with bolt on performance for modern muscle cars and trucks since its beginning in 1988. In fact it was our founders Brian & Ken Murphy that designed and developed the first aftermarket air intake systems & performance throttle bodies for the then newly fuel injected 5.0L Mustang and TPI Camaro models. Back then nobody even knew what an air intake or throttle body was because people were just learning about these modern day fuel injected pony cars Detroit began producing. Fast forward to today and many enthusiasts have only grown up on computer controlled fuel injection with a vocabulary full of upgrade items such as throttle body, air intake & mass air meter and have never driven a carbureted equipped vehicle. It?s this early experience and years of research & development, along with millions of dedicated enthusiasts that have allowed the BBK brand to grow into the largest source of modern day performance products for today?s cars & trucks. Starting from a 1200 ft building in Southern California, our BBK facilities have grown as fast as our product lines with nearly 200,000ft of state of the art design, manufacturing & distribution facilities located in California & Florida. Our R&D centers feature a total of three dyno cells and a team of highly skilled craftsman that also happen to be enthusiasts who really enjoy bringing the best performance products to market. Our manufacturing campus includes a top notch CNC machine division along with a state of the art exhaust division using a combination of skilled hand craftsmanship with a blend of CNC bending & robotic welding for maximum quality in every BBK product. Our moto is ?American Designed & Built? and it?s something the entire BBK team is proud of and will never change. If you are the owner of a modern day Dodge, Ford or GM vehicle and you are looking to upgrade your performance while maintaining OEM quality & drivability, you have come to the right place.
Item#:
35-3517
Manufacturer Item:
3517
Manufacturer:
BBK
You must be logged in to order this item. Log in here
HIGH-FLOW CLUTCH LINE FOR T-56
The hydraulic clutch line is responsible for transporting hydraulic fluid from your clutch master cylinder to your clutch slave cylinderincreasing fluid pressure to disengage the clutch, and decreasing pressure to engage the clutch. Holley high-flow clutch hoses serve as direct replacements for the factory originals. They allow for increased fluid capacity, and the braided steel line construction will improve clutch pedal feelby minimizing expansion and contraction of fluid within the line that commonly occurs with most factory-style plastic/polymer lines. To make installation a snap, a roll pin and O-ring are included. Order the host recommended for your application.
Item#:
272-319-306
Manufacturer Item:
319-306
Manufacturer:
Holley
You must be logged in to order this item. Log in here
Clutch Quadrant And Cable Kit
Since 1988 the BBK Performance brand has been synonymous with bolt on performance for modern muscle cars and trucks since its beginning in 1988. In fact it was our founders Brian & Ken Murphy that designed and developed the first aftermarket air intake systems & performance throttle bodies for the then newly fuel injected 5.0L Mustang and TPI Camaro models. Back then nobody even knew what an air intake or throttle body was because people were just learning about these modern day fuel injected pony cars Detroit began producing. Fast forward to today and many enthusiasts have only grown up on computer controlled fuel injection with a vocabulary full of upgrade items such as throttle body, air intake & mass air meter and have never driven a carbureted equipped vehicle. It?s this early experience and years of research & development, along with millions of dedicated enthusiasts that have allowed the BBK brand to grow into the largest source of modern day performance products for today?s cars & trucks. Starting from a 1200 ft building in Southern California, our BBK facilities have grown as fast as our product lines with nearly 200,000ft of state of the art design, manufacturing & distribution facilities located in California & Florida. Our R&D centers feature a total of three dyno cells and a team of highly skilled craftsman that also happen to be enthusiasts who really enjoy bringing the best performance products to market. Our manufacturing campus includes a top notch CNC machine division along with a state of the art exhaust division using a combination of skilled hand craftsmanship with a blend of CNC bending & robotic welding for maximum quality in every BBK product. Our moto is ?American Designed & Built? and it?s something the entire BBK team is proud of and will never change. If you are the owner of a modern day Dodge, Ford or GM vehicle and you are looking to upgrade your performance while maintaining OEM quality & drivability, you have come to the right place.
Item#:
35-1609
Manufacturer Item:
1609
Manufacturer:
BBK
You must be logged in to order this item. Log in here
Since 1988 the BBK Performance brand has been synonymous with bolt on performance for modern muscle cars and trucks since its beginning in 1988. In fact it was our founders Brian & Ken Murphy that designed and developed the first aftermarket air intake systems & performance throttle bodies for the then newly fuel injected 5.0L Mustang and TPI Camaro models. Back then nobody even knew what an air intake or throttle body was because people were just learning about these modern day fuel injected pony cars Detroit began producing. Fast forward to today and many enthusiasts have only grown up on computer controlled fuel injection with a vocabulary full of upgrade items such as throttle body, air intake & mass air meter and have never driven a carbureted equipped vehicle. It?s this early experience and years of research & development, along with millions of dedicated enthusiasts that have allowed the BBK brand to grow into the largest source of modern day performance products for today?s cars & trucks. Starting from a 1200 ft building in Southern California, our BBK facilities have grown as fast as our product lines with nearly 200,000ft of state of the art design, manufacturing & distribution facilities located in California & Florida. Our R&D centers feature a total of three dyno cells and a team of highly skilled craftsman that also happen to be enthusiasts who really enjoy bringing the best performance products to market. Our manufacturing campus includes a top notch CNC machine division along with a state of the art exhaust division using a combination of skilled hand craftsmanship with a blend of CNC bending & robotic welding for maximum quality in every BBK product. Our moto is ?American Designed & Built? and it?s something the entire BBK team is proud of and will never change. If you are the owner of a modern day Dodge, Ford or GM vehicle and you are looking to upgrade your performance while maintaining OEM quality & drivability, you have come to the right place.
Item#:
35-3519
Manufacturer Item:
3519
Manufacturer:
BBK
You must be logged in to order this item. Log in here
CLUTCH COVER & DISC
Centerforce is proud to announce DFX as their competition-proven clutch packages for select import and domestic applications. These new DFX series clutches are engineered for competition standards of quality and craftsmanship. The DFX series clutches are aimed at high-end applications that continually demand increased integrity and holding capacity. DFX clutch kits score big--not only with their holding capacity and strength, but also with their race-inspired drivability. The DFX clutches retain an easy pedal effort, thanks to Centerforce's patented ball-bearing actuated diaphragm, for smooth engagements without detriment to the vehicle's release components. The Centerforce DFX performance clutch systems utilize nodular iron pressure plate rings and reinforcements designed to help prevent drive strap breakage and safety. The DFX series clutch kits allow end users to tailor their driving performance and style with different choices of clutches and clutch discs, from street/strip to full-on drag racing capabilities.
Item#:
87-01010249
Manufacturer Item:
01010249
Manufacturer:
Centerforce
You must be logged in to order this item. Log in here
75-99 BMW 316 318 320i 325 328
Centerforce throwout bearings are made to withstand the wear and tear that clutches go through. They are designed to provide reliable service, race after race.
Item#:
87-1172
Manufacturer Item:
1172
Manufacturer:
Centerforce
You must be logged in to order this item. Log in here
69-74 Nissan 240 & 260
Centerforce throwout bearings are made to withstand the wear and tear that clutches go through. They are designed to provide reliable service, race after race.
Item#:
87-1602
Manufacturer Item:
1602
Manufacturer:
Centerforce
You must be logged in to order this item. Log in here
79-05 Chry Dodge Eagle Hyundai
Centerforce throwout bearings are made to withstand the wear and tear that clutches go through. They are designed to provide reliable service, race after race.
Item#:
87-210
Manufacturer Item:
210
Manufacturer:
Centerforce
You must be logged in to order this item. Log in here
|◀ 1 - 12 of 880 ▶|
View: