|◀ 1 - 12 of 6919 ▶|
View:
C.A.S. SUBARU IMPREZA WRX 2.5L 08-14
The AEM 21-478WR Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Subaru WRX, WRX STI, Impreza WRX and Impreza WRX STI models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable textured red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-478WR vehicle applications to determine the legal status for each vehicle.
Item#:
5-21-478WR
Manufacturer Item:
AEM-21-478WR
Manufacturer:
AEM Intakes
You must be logged in to order this item. Log in here
C.A.S. HYUN GENESIS COUPE V6-3.8L F/I; 2013-2016
The AEM 21-730C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Genesis Coupe models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield with a replacement fresh air adapter scoop which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the air temperature sensor, engine breather tube and sound tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-730C vehicle applications to determine the legal status for each vehicle.
Item#:
5-21-730C
Manufacturer Item:
AEM-21-730C
Manufacturer:
AEM Intakes
You must be logged in to order this item. Log in here
C.A.S. SUBARU WRX L4-2.0L F/I; 2015-2020
The AEM 21-732C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Subaru WRX models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-732C vehicle applications to determine the legal status for each vehicle.
Item#:
5-21-732C
Manufacturer Item:
AEM-21-732C
Manufacturer:
AEM Intakes
You must be logged in to order this item. Log in here
C.A.S. SUBARU WRX STI H4-2.5L F/I; 2015-2017
The AEM 21-735WR Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Subaru WRX STI models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable textured red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-735WR vehicle applications to determine the legal status for each vehicle.
Item#:
5-21-735WR
Manufacturer Item:
AEM-21-735WR
Manufacturer:
AEM Intakes
You must be logged in to order this item. Log in here
Get more power across your everyday RPM range with this Momentum GT Cold Air Intake System. Its massive intake tube and filter ensure it not only will perform - but also will draw attention to your new RAM 1500's engine bay. Dyno-Proven Gains up to +8 HP and +8 Lbs. x Ft. TQ Outflows Factory Intake by 39% Large Three Layer Performance Air Filter: The Momentums unique filter-to-housing interface was built to feature the largest air filter possible. This aFe POWER Pro DRY S is a 9" tall, oil-free, 360-degree radial flow performance air filter with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Unique One-Piece Housing: The textured one-piece sealed housing, constructed of cross-linked polyethylene (XLPE), is used to eliminate the use of an overabundance of parts and ensure the coolest air intake charge possible. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. An optional auxiliary air inlet pulls in additional cool air from the inner fender when under power. Massive Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Premium Components: Stainless-steel T-Bolt clamps and an injection molded coupling are included for strength and durability, while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts and utilize factory mounting points for a fast and easy installation. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Item#:
13-50-70013D
Manufacturer Item:
50-70013D
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
Get more power across your everyday RPM range with this Momentum GT Cold Air Intake System. Its massive intake tube and filter ensure it not only will perform - but also will draw attention to your new RAM 1500's engine bay. Dyno-Proven Gains up to +14 HP and +13 Lbs. x Ft. TQ Outflows Factory Intake by 43% Large Five Layer Performance Air Filter: The Momentums unique filter-to-housing interface was built to feature the largest air filter possible. This aFe POWER Pro 5R is a pre-oiled, 360-degree, radial flow air filter designed for maximum performance. It features an inverted top, allowing for more surface area, higher flow, and more dust holding capacity. Five layers of progressively finer cotton gauze media provide your engine with the largest amount of high-flowing air, usually resulting in the highest power gains, out of all our filter media options. This media is perfect for street and/or track use. Unique One-Piece Housing: The textured one-piece sealed housing, constructed of cross-linked polyethylene (XLPE), is used to eliminate the use of an overabundance of parts and ensure the coolest air intake charge possible. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. An optional auxiliary air inlet pulls in additional cool air from the inner fender when under power. Massive Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Premium Components: Stainless-steel T-Bolt clamps and an injection molded coupling are included for strength and durability, while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts and utilize factory mounting points for a fast and easy installation. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Item#:
13-50-70013R
Manufacturer Item:
50-70013R
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
GM Silverado/Sierra 1500 19-20 V6-4.3L/V8-5.3/6.2L
Large Five Layer Performance Air Filter: Momentums innovative filter-to-housing interface was built to feature the largest air filter possible. This 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. Our Pro 5R media provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals.
Item#:
13-50-70044R
Manufacturer Item:
50-70044R
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
Large Three Layer Performance Air Filter: Momentums unique filter-to-housing interface was built to feature the largest air filter possible. This 9 tall 360-degree radial flow air filter features a 5-1/2" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals, while reinforced metal provides maximum strength to prevent filter collapse. Unique One-Piece Housing: The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented (US PAT 9440175) filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing connect to the factory air inlet scoop, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air. A plug is provided to close the auxiliary opening. Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Premium Components: Stainless-steel T-bolt clamps are included for strength, and a premium bellows silicone coupling allows for ample flexibility. Momentum HD intakes are designed with fewer parts for a fast and easy installation.
Item#:
13-50-70051D
Manufacturer Item:
50-70051D
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
Large Ten Layer Performance Air Filter: Momentums unique filter-to-housing interface was built to feature the largest air filter possible. This 9 tall, pre-oiled 360-degree radial flow air filter features a 5-1/2 flange and our pre-oiled Pro 10R media with ten layers of progressively finer cotton gauze media for maximum performance and filtration. Its inverted top and large surface area provide much longer life between maintenance intervals, while reinforced metal provides maximum strength to prevent filter collapse. This media is best suited for off-road applications. Unique One-Piece Housing: The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented (US PAT 9440175) filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing connect to the factory air inlet scoop, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air. A plug is provided to close the auxiliary opening. Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Premium Components: Stainless-steel T-bolt clamps are included for strength, and a premium bellows silicone coupling allows for ample flexibility. Momentum HD intakes are designed with fewer parts for a fast and easy installation.
Item#:
13-50-70051T
Manufacturer Item:
50-70051T
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
| Large Three Layer Performance Air Filter: | This 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals. | Filter-to-Housing Interface: | Momentums innovative filter-to-housing interface was built to feature the largest air filter possible. Once the system is installed, the air filter can be easily removed from the housing for maintenance by only uninstalling the intake tube. | Unique One-Piece Housing: | The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented (US PAT 9440175) filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing utilizes the factory air inlet, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air. | Dyno-Tuned Intake Tube: | This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. | Premium Components: | Stainless-steel T-bolt clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Momentum GT intakes are designed with fewer parts for a fast and easy installation. | Emissions Disclaimer: | This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Item#:
13-50-70055D
Manufacturer Item:
50-70055D
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
| Large Five Layer Performance Air Filter: | This 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. Our Pro 5R media provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. | Filter-to-Housing Interface: | Momentums innovative filter-to-housing interface was built to feature the largest air filter possible. Once the system is installed, the air filter can be easily removed from the housing for maintenance by only uninstalling the intake tube. | Unique One-Piece Housing: | The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented (US PAT 9440175) filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing utilizes the factory air inlet, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air. | Dyno-Tuned Intake Tube: | This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. | Premium Components: | Stainless-steel T-bolt clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Momentum GT intakes are designed with fewer parts for a fast and easy installation. | Emissions Disclaimer:| This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Item#:
13-50-70055R
Manufacturer Item:
50-70055R
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
| Large Three Layer Performance Air Filter: | Momentums unique filter-to-housing interface was built to feature the largest air filter possible. This 9 tall 360-degree radial flow air filter features a 5-1/2" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals, while reinforced metal provides maximum strength to prevent filter collapse. | | Filter-to-Housing Interface: | Momentums innovative filter-to-housing interface was built to feature the largest air filter possible. Once the system is installed, the air filter can be easily removed from the housing for maintenance by only uninstalling the intake tube. | | Unique One-Piece Housing: | The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented (US PAT 9440175) filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing incorporates factory air scoop inlets, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air. | | Dyno-Tuned Intake Tube: | This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. | | Premium Components: | Stainless-steel T-bolt clamps and a silicone coupling are used for strength and durability. Momentum HD intakes are designed with fewer parts for a fast and easy installation.
Item#:
13-50-70064D
Manufacturer Item:
5070064D
Manufacturer:
AFE Power
You must be logged in to order this item. Log in here
|◀ 1 - 12 of 6919 ▶|
View: