|◀ 1 - 12 of 296 ▶|
View:
The FASS BBRK-1001 Banjo Bolt Replacement Kit for your 1998.5-2002 Dodge 5.9L Cummins is designed to eliminate the restrictive banjo bolts in your fuel system. Also known as a "Big Line Kit", the BBRK-1001 improves fuel flow, horsepower and can extend pump life due to less restriction. FEATURES: Removes Factory Banjo Bolts Increases Fuel Flow Extends Pump Life
Item#:
227-BBRK-1001
Manufacturer Item:
BBRK-1001
Manufacturer:
FASS Performance
You must be logged in to order this item. Log in here
The FASS DFD-4000 Duramax Fuel Filter Delete for your 2001-2016 GM 6.6L Duramax is for use after the installation of a FASS Fuel Air Separation System. Once installed the factory fuel filter is no longer needed and can be easily removed by using this Factory Fuel Filter Canister Delete. Because your Duramax fuel filter is located after the FASS filtration system you will still need to replace the factory filter every 5,000-8,000 miles. This filter delete kit will replace your now useless fuel filter with a spin on canister that will allow fuel to flow freely into the engine, saving you even more money. This spin on Fuel Filter Delete Kit is a perfect addition to your FASS Titanium diesel fuel pump and comes with all required hardware for a professional installation. FEATURES: Installs In Place Of Stock Filter Allows For Unrestricted Fuel Flow To Engine Built-In Gauge Port For Fuel Pressure Monitoring Eliminates Costs Associated With Changing Stock Filter Note: This product is ONLY for use on trucks that already have another form of filtration such as a FASS Titanium Series Fuel System.
Item#:
227-DFD-4000
Manufacturer Item:
DFD-4000
Manufacturer:
FASS Performance
You must be logged in to order this item. Log in here
Item#:
227-DPK-1001
Manufacturer Item:
DPK 1001
Manufacturer:
FASS Performance
You must be logged in to order this item. Log in here
Item#:
227-FL-1001
Manufacturer Item:
FL-1001
Manufacturer:
FASS Performance
You must be logged in to order this item. Log in here
Item#:
227-FL-1002
Manufacturer Item:
FL-1002
Manufacturer:
FASS Performance
You must be logged in to order this item. Log in here
The FASS FLK-S01 Fuel Feed Line is used when installing a FASS Fuel System on a Class 8 Application. Kit includes 5 feet of hose and 2 fittings. FEATURES: For FASS Class 8 Pumps Fuel Feed Line
Item#:
227-FLK-S01
Manufacturer Item:
FLK-S01
Manufacturer:
FASS Performance
You must be logged in to order this item. Log in here
The FASS FLK-S02 Single Return Line is used when installing a FASS Fuel System on a Class 8 Application. Kit includes 10 feet of hose and fittings. FEATURES: For FASS Class 8 Pumps Single Return Line
Item#:
227-FLK-S02
Manufacturer Item:
FLK-S02
Manufacturer:
FASS Performance
You must be logged in to order this item. Log in here
The FASS FLK-S06 Double Vent Return Line is for use when installing a FASS Class 8 Fuel Pump. Designed to fit the following applications: Volvo (VED), Mercedes (MBE-4000), Detroit (DDEC I, II, III or IV), Cummins (Small or Big Cam I, II, III, IV or NTC/STC, L10), Cummins M11, N14 & ISX, Cummins Signature Series, Caterpillar. FEATURES: For Class 8 Models Double Vent Return Line Kit
Item#:
227-FLK-S06
Manufacturer Item:
FLK-S06
Manufacturer:
FASS Performance
You must be logged in to order this item. Log in here
The FASS FPR-1001 Fuel Pressure Regulator is intended for aftermarket performance applications requiring higher fuel pressures than a typical daily driver. These applications can vary from drag race vehicles, competition pulling trucks or high performance marine applications. For your convenience we have pre-drilled and tapped a fuel pressure gauge port that will make adjusting your regulator simple, eliminating any guess work. As an added performance benefit, we have also engineered a boost compensation port. This will allow you to run a line from your manifold to increase fuel pressure, very beneficial when under active acceleration and fuel demand has been increased. FEATURES: Adjustable Fuel Pressure For Gas & Diesel Applications Built-In Fuel Pressure Port Boost Compensation Port Designed For 1/2" Lines
Item#:
227-FPR-1001
Manufacturer Item:
FPR-1001
Manufacturer:
FASS Performance
You must be logged in to order this item. Log in here
The FASS FS-2001 Titanium Series Water Separator is designed for use on the older (Blue) models of the Titanium Series Fuel Pumps. This filter is a direct replacement and is suggested to be changed every 30K miles. FEATURES: Fits Blue Titanium Model Also Fits Older Red Titanium 95
Item#:
227-FS-2001
Manufacturer Item:
FS-2001
Manufacturer:
FASS Performance
You must be logged in to order this item. Log in here
The FASS FSN-2001 Titanium Series Fuel Filter Nipple is required to use the FWS-3003 Fuel Filter on a FASS Titanium Series Pump built before Mid-2010. FEATURES: Allows For More Filter Options For Older FASS Titanium Series Pumps Note from FASS: In the Summer of 2010 our filter manufacturer relocated outside of the US and discontinued the production of the FF-2003 Fuel Filter. We made the change to an American made manufacturer which forced us to change the size of the fuel filter thread. However, the new thread size offers you a much larger selection of available cross references. If you currently have an FF-2003 or FF-5712, those are the ONLY interchangeable filters you can use with your current nipple. If you have the FWS-3003, Donaldson P553203 then you have the new updated nipple. If you have the FF2003 or FF5712 and would like to order the new filter nipple for more cross references, simply order this part.
Item#:
227-FSN-2001
Manufacturer Item:
FSN 2001
Manufacturer:
FASS Performance
You must be logged in to order this item. Log in here
Item#:
227-FTR-1001
Manufacturer Item:
FTR-1001
Manufacturer:
FASS Performance
You must be logged in to order this item. Log in here
|◀ 1 - 12 of 296 ▶|
View: